# Remediation is applicable only in certain platforms
if ( ( rpm --quiet -q pam && rpm --quiet -q kernel-default || rpm --quiet -q kernel-default-base ) ); then

if [ -f /usr/bin/authselect ]; then
    if authselect list-features sssd | grep -q with-silent-lastlog; then
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi
        authselect disable-feature with-silent-lastlog

        authselect apply-changes -b
    else
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            # The "local" profile does not contain essential security features required by multiple Benchmarks.
            # If currently used, it is replaced by "sssd", which is the best option in this case.
            if [[ $CURRENT_PROFILE == local ]]; then
                CURRENT_PROFILE="sssd"
            fi
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/login")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
        if [ -e "$PAM_FILE_PATH" ] ; then
            PAM_FILE_PATH="$PAM_FILE_PATH"
            if [ -f /usr/bin/authselect ]; then
                
                if ! authselect check; then
                echo "
                authselect integrity check failed. Remediation aborted!
                This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
                It is not recommended to manually edit the PAM files when authselect tool is available.
                In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
                exit 1
                fi

                CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
                # If not already in use, a custom profile is created preserving the enabled features.
                if [[ ! $CURRENT_PROFILE == custom/* ]]; then
                    ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
                    # The "local" profile does not contain essential security features required by multiple Benchmarks.
                    # If currently used, it is replaced by "sssd", which is the best option in this case.
                    if [[ $CURRENT_PROFILE == local ]]; then
                        CURRENT_PROFILE="sssd"
                    fi
                    authselect create-profile hardening -b $CURRENT_PROFILE
                    CURRENT_PROFILE="custom/hardening"
                    
                    authselect apply-changes -b --backup=before-hardening-custom-profile
                    authselect select $CURRENT_PROFILE
                    for feature in $ENABLED_FEATURES; do
                        authselect enable-feature $feature;
                    done
                    
                    authselect apply-changes -b --backup=after-hardening-custom-profile
                fi
                PAM_FILE_NAME=$(basename "$PAM_FILE_PATH")
                PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

                authselect apply-changes -b
            fi
            

                if ! grep -qP "^\s*session\s+optional\s+pam_lastlog.so\s*.*" "$PAM_FILE_PATH"; then
                    # Line matching group + control + module was not found. Check group + module.
                    if [ "$(grep -cP '^\s*session\s+.*\s+pam_lastlog.so\s*' "$PAM_FILE_PATH")" -eq 1 ]; then
                        # The control is updated only if one single line matches.
                        sed -i -E --follow-symlinks "s/^(\s*session\s+).*(\bpam_lastlog.so.*)/\1optional \2/" "$PAM_FILE_PATH"
                    else
                        LAST_MATCH_LINE=$(grep -nP "^\s*session.*include\s+common-session$" "$PAM_FILE_PATH" | tail -n 1 | cut -d: -f 1)
                        if [ ! -z $LAST_MATCH_LINE ]; then
                            sed -i --follow-symlinks $LAST_MATCH_LINE" a session     optional    pam_lastlog.so" "$PAM_FILE_PATH"
                        else
                            echo "session    optional    pam_lastlog.so" >> "$PAM_FILE_PATH"
                        fi
                    fi
                fi
                # Check the option
                if ! grep -qP "^\s*session\s+optional\s+pam_lastlog.so\s*.*\sshowfailed\b" "$PAM_FILE_PATH"; then
                    sed -i -E --follow-symlinks "/\s*session\s+optional\s+pam_lastlog.so.*/ s/$/ showfailed/" "$PAM_FILE_PATH"
                fi
            if [ -f /usr/bin/authselect ]; then
                
                authselect apply-changes -b
            fi
        else
            echo "$PAM_FILE_PATH was not found" >&2
        fi
        if [ -e "$PAM_FILE_PATH" ] ; then
            PAM_FILE_PATH="$PAM_FILE_PATH"
            if [ -f /usr/bin/authselect ]; then
                
                if ! authselect check; then
                echo "
                authselect integrity check failed. Remediation aborted!
                This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
                It is not recommended to manually edit the PAM files when authselect tool is available.
                In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
                exit 1
                fi

                CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
                # If not already in use, a custom profile is created preserving the enabled features.
                if [[ ! $CURRENT_PROFILE == custom/* ]]; then
                    ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
                    # The "local" profile does not contain essential security features required by multiple Benchmarks.
                    # If currently used, it is replaced by "sssd", which is the best option in this case.
                    if [[ $CURRENT_PROFILE == local ]]; then
                        CURRENT_PROFILE="sssd"
                    fi
                    authselect create-profile hardening -b $CURRENT_PROFILE
                    CURRENT_PROFILE="custom/hardening"
                    
                    authselect apply-changes -b --backup=before-hardening-custom-profile
                    authselect select $CURRENT_PROFILE
                    for feature in $ENABLED_FEATURES; do
                        authselect enable-feature $feature;
                    done
                    
                    authselect apply-changes -b --backup=after-hardening-custom-profile
                fi
                PAM_FILE_NAME=$(basename "$PAM_FILE_PATH")
                PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

                authselect apply-changes -b
            fi
            
        if grep -qP "^\s*session\s+optional\s+pam_lastlog.so\s.*\bsilent\b" "$PAM_FILE_PATH"; then
            sed -i -E --follow-symlinks "s/(.*session.*optional.*pam_lastlog.so.*)\bsilent\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
        fi
            if [ -f /usr/bin/authselect ]; then
                
                authselect apply-changes -b
            fi
        else
            echo "$PAM_FILE_PATH was not found" >&2
        fi
    fi
else
    if [ -e "/etc/pam.d/login" ] ; then
            PAM_FILE_PATH="/etc/pam.d/login"
            if [ -f /usr/bin/authselect ]; then
                
                if ! authselect check; then
                echo "
                authselect integrity check failed. Remediation aborted!
                This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
                It is not recommended to manually edit the PAM files when authselect tool is available.
                In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
                exit 1
                fi

                CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
                # If not already in use, a custom profile is created preserving the enabled features.
                if [[ ! $CURRENT_PROFILE == custom/* ]]; then
                    ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
                    # The "local" profile does not contain essential security features required by multiple Benchmarks.
                    # If currently used, it is replaced by "sssd", which is the best option in this case.
                    if [[ $CURRENT_PROFILE == local ]]; then
                        CURRENT_PROFILE="sssd"
                    fi
                    authselect create-profile hardening -b $CURRENT_PROFILE
                    CURRENT_PROFILE="custom/hardening"
                    
                    authselect apply-changes -b --backup=before-hardening-custom-profile
                    authselect select $CURRENT_PROFILE
                    for feature in $ENABLED_FEATURES; do
                        authselect enable-feature $feature;
                    done
                    
                    authselect apply-changes -b --backup=after-hardening-custom-profile
                fi
                PAM_FILE_NAME=$(basename "/etc/pam.d/login")
                PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

                authselect apply-changes -b
            fi
            

                if ! grep -qP "^\s*session\s+optional\s+pam_lastlog.so\s*.*" "$PAM_FILE_PATH"; then
                    # Line matching group + control + module was not found. Check group + module.
                    if [ "$(grep -cP '^\s*session\s+.*\s+pam_lastlog.so\s*' "$PAM_FILE_PATH")" -eq 1 ]; then
                        # The control is updated only if one single line matches.
                        sed -i -E --follow-symlinks "s/^(\s*session\s+).*(\bpam_lastlog.so.*)/\1optional \2/" "$PAM_FILE_PATH"
                    else
                        LAST_MATCH_LINE=$(grep -nP "^\s*session.*include\s+common-session$" "$PAM_FILE_PATH" | tail -n 1 | cut -d: -f 1)
                        if [ ! -z $LAST_MATCH_LINE ]; then
                            sed -i --follow-symlinks $LAST_MATCH_LINE" a session     optional    pam_lastlog.so" "$PAM_FILE_PATH"
                        else
                            echo "session    optional    pam_lastlog.so" >> "$PAM_FILE_PATH"
                        fi
                    fi
                fi
                # Check the option
                if ! grep -qP "^\s*session\s+optional\s+pam_lastlog.so\s*.*\sshowfailed\b" "$PAM_FILE_PATH"; then
                    sed -i -E --follow-symlinks "/\s*session\s+optional\s+pam_lastlog.so.*/ s/$/ showfailed/" "$PAM_FILE_PATH"
                fi
            if [ -f /usr/bin/authselect ]; then
                
                authselect apply-changes -b
            fi
        else
            echo "/etc/pam.d/login was not found" >&2
        fi
    if [ -e "/etc/pam.d/login" ] ; then
            PAM_FILE_PATH="/etc/pam.d/login"
            if [ -f /usr/bin/authselect ]; then
                
                if ! authselect check; then
                echo "
                authselect integrity check failed. Remediation aborted!
                This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
                It is not recommended to manually edit the PAM files when authselect tool is available.
                In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
                exit 1
                fi

                CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
                # If not already in use, a custom profile is created preserving the enabled features.
                if [[ ! $CURRENT_PROFILE == custom/* ]]; then
                    ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
                    # The "local" profile does not contain essential security features required by multiple Benchmarks.
                    # If currently used, it is replaced by "sssd", which is the best option in this case.
                    if [[ $CURRENT_PROFILE == local ]]; then
                        CURRENT_PROFILE="sssd"
                    fi
                    authselect create-profile hardening -b $CURRENT_PROFILE
                    CURRENT_PROFILE="custom/hardening"
                    
                    authselect apply-changes -b --backup=before-hardening-custom-profile
                    authselect select $CURRENT_PROFILE
                    for feature in $ENABLED_FEATURES; do
                        authselect enable-feature $feature;
                    done
                    
                    authselect apply-changes -b --backup=after-hardening-custom-profile
                fi
                PAM_FILE_NAME=$(basename "/etc/pam.d/login")
                PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

                authselect apply-changes -b
            fi
            
        if grep -qP "^\s*session\s+optional\s+pam_lastlog.so\s.*\bsilent\b" "$PAM_FILE_PATH"; then
            sed -i -E --follow-symlinks "s/(.*session.*optional.*pam_lastlog.so.*)\bsilent\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
        fi
            if [ -f /usr/bin/authselect ]; then
                
                authselect apply-changes -b
            fi
        else
            echo "/etc/pam.d/login was not found" >&2
        fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-85560-1
  - CJIS-5.5.2
  - DISA-STIG-SLES-15-020080
  - NIST-800-53-AC-9
  - NIST-800-53-AC-9(1)
  - PCI-DSS-Req-10.2.4
  - PCI-DSSv4-10.2
  - PCI-DSSv4-10.2.1
  - PCI-DSSv4-10.2.1.4
  - configure_strategy
  - display_login_attempts
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed

- name: Ensure PAM Displays Last Logon/Access Notification - Check if system relies
    on authselect tool
  ansible.builtin.stat:
    path: /usr/bin/authselect
  register: result_authselect_present
  when: ( "pam" in ansible_facts.packages and ("kernel-default" in ansible_facts.packages
    or "kernel-default-base" in ansible_facts.packages) )
  tags:
  - CCE-85560-1
  - CJIS-5.5.2
  - DISA-STIG-SLES-15-020080
  - NIST-800-53-AC-9
  - NIST-800-53-AC-9(1)
  - PCI-DSS-Req-10.2.4
  - PCI-DSSv4-10.2
  - PCI-DSSv4-10.2.1
  - PCI-DSSv4-10.2.1.4
  - configure_strategy
  - display_login_attempts
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed

- name: Ensure PAM Displays Last Logon/Access Notification - Collect the Available
    authselect Features
  ansible.builtin.command:
    cmd: authselect list-features sssd
  register: result_authselect_available_features
  changed_when: false
  check_mode: false
  when:
  - ( "pam" in ansible_facts.packages and ("kernel-default" in ansible_facts.packages
    or "kernel-default-base" in ansible_facts.packages) )
  - result_authselect_present.stat.exists
  tags:
  - CCE-85560-1
  - CJIS-5.5.2
  - DISA-STIG-SLES-15-020080
  - NIST-800-53-AC-9
  - NIST-800-53-AC-9(1)
  - PCI-DSS-Req-10.2.4
  - PCI-DSSv4-10.2
  - PCI-DSSv4-10.2.1
  - PCI-DSSv4-10.2.1.4
  - configure_strategy
  - display_login_attempts
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed

- name: Ensure PAM Displays Last Logon/Access Notification - Configure pam_lastlog.so
    Using authselect Feature
  block:

  - name: Ensure PAM Displays Last Logon/Access Notification - Check integrity of
      authselect current profile
    ansible.builtin.command:
      cmd: authselect check
    register: result_authselect_check_cmd
    changed_when: false
    check_mode: false
    failed_when: false

  - name: Ensure PAM Displays Last Logon/Access Notification - Informative message
      based on the authselect integrity check result
    ansible.builtin.assert:
      that:
      - ansible_check_mode or result_authselect_check_cmd.rc == 0
      fail_msg:
      - authselect integrity check failed. Remediation aborted!
      - This remediation could not be applied because an authselect profile was not
        selected or the selected profile is not intact.
      - It is not recommended to manually edit the PAM files when authselect tool
        is available.
      - In cases where the default authselect profile does not cover a specific demand,
        a custom authselect profile is recommended.
      success_msg:
      - authselect integrity check passed

  - name: Ensure PAM Displays Last Logon/Access Notification - Get authselect Features
      Currently Enabled
    ansible.builtin.shell:
      cmd: authselect current | tail -n+3 | awk '{ print $2 }'
    register: result_authselect_features
    changed_when: false
    check_mode: false
    when:
    - result_authselect_check_cmd is success

  - name: Ensure PAM Displays Last Logon/Access Notification - Ensure "with-silent-lastlog"
      Feature is Disabled Using authselect Tool
    ansible.builtin.command:
      cmd: authselect disable-feature with-silent-lastlog
    register: result_authselect_disable_feature_cmd
    when:
    - result_authselect_check_cmd is success
    - result_authselect_features.stdout is search("with-silent-lastlog")

  - name: Ensure PAM Displays Last Logon/Access Notification - Ensure authselect changes
      are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_disable_feature_cmd is not skipped
    - result_authselect_disable_feature_cmd is success
  when:
  - ( "pam" in ansible_facts.packages and ("kernel-default" in ansible_facts.packages
    or "kernel-default-base" in ansible_facts.packages) )
  - result_authselect_present.stat.exists
  - result_authselect_available_features.stdout is search("with-silent-lastlog")
  tags:
  - CCE-85560-1
  - CJIS-5.5.2
  - DISA-STIG-SLES-15-020080
  - NIST-800-53-AC-9
  - NIST-800-53-AC-9(1)
  - PCI-DSS-Req-10.2.4
  - PCI-DSSv4-10.2
  - PCI-DSSv4-10.2.1
  - PCI-DSSv4-10.2.1.4
  - configure_strategy
  - display_login_attempts
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed

- name: Ensure PAM Displays Last Logon/Access Notification - Configure pam_lastlog.so
    in appropriate PAM files
  block:

  - name: Ensure PAM Displays Last Logon/Access Notification - Define the PAM file
      to be edited as a local fact
    ansible.builtin.set_fact:
      pam_file_path: /etc/pam.d/login

  - name: Ensure PAM Displays Last Logon/Access Notification - Check if system relies
      on authselect tool
    ansible.builtin.stat:
      path: /usr/bin/authselect
    register: result_authselect_present

  - name: Ensure PAM Displays Last Logon/Access Notification - Ensure authselect custom
      profile is used if authselect is present
    block:

    - name: Ensure PAM Displays Last Logon/Access Notification - Check integrity of
        authselect current profile
      ansible.builtin.command:
        cmd: authselect check
      register: result_authselect_check_cmd
      changed_when: false
      check_mode: false
      failed_when: false

    - name: Ensure PAM Displays Last Logon/Access Notification - Informative message
        based on the authselect integrity check result
      ansible.builtin.assert:
        that:
        - ansible_check_mode or result_authselect_check_cmd.rc == 0
        fail_msg:
        - authselect integrity check failed. Remediation aborted!
        - This remediation could not be applied because an authselect profile was
          not selected or the selected profile is not intact.
        - It is not recommended to manually edit the PAM files when authselect tool
          is available.
        - In cases where the default authselect profile does not cover a specific
          demand, a custom authselect profile is recommended.
        success_msg:
        - authselect integrity check passed

    - name: Ensure PAM Displays Last Logon/Access Notification - Get authselect current
        profile
      ansible.builtin.shell:
        cmd: authselect current -r | awk '{ print $1 }'
      register: result_authselect_profile
      changed_when: false
      when:
      - result_authselect_check_cmd is success

    - name: Ensure PAM Displays Last Logon/Access Notification - Define the current
        authselect profile as a local fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is match("custom/")

    - name: Ensure PAM Displays Last Logon/Access Notification - Define the new authselect
        custom profile as a local fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: custom/hardening
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is not match("custom/")

    - name: Ensure PAM Displays Last Logon/Access Notification - Get authselect current
        features to also enable them in the custom profile
      ansible.builtin.shell:
        cmd: authselect current | tail -n+3 | awk '{ print $2 }'
      register: result_authselect_features
      changed_when: false
      check_mode: false
      when:
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")

    - name: Ensure PAM Displays Last Logon/Access Notification - Check if any custom
        profile with the same name was already created
      ansible.builtin.stat:
        path: /etc/authselect/{{ authselect_custom_profile }}
      register: result_authselect_custom_profile_present
      changed_when: false
      when:
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")

    - name: Ensure PAM Displays Last Logon/Access Notification - Create an authselect
        custom profile based on the current profile
      ansible.builtin.command:
        cmd: authselect create-profile hardening -b {{ authselect_current_profile
          }}
      when:
      - result_authselect_profile is not skipped
      - result_authselect_check_cmd is success
      - authselect_current_profile is not match("^(custom/|local)")
      - not result_authselect_custom_profile_present.stat.exists

    - name: Ensure PAM Displays Last Logon/Access Notification - Create an authselect
        custom profile based on sssd profile
      ansible.builtin.command:
        cmd: authselect create-profile hardening -b sssd
      when:
      - result_authselect_profile is not skipped
      - result_authselect_check_cmd is success
      - authselect_current_profile is match("local")
      - not result_authselect_custom_profile_present.stat.exists

    - name: Ensure PAM Displays Last Logon/Access Notification - Ensure authselect
        changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: Ensure PAM Displays Last Logon/Access Notification - Ensure the authselect
        custom profile is selected
      ansible.builtin.command:
        cmd: authselect select {{ authselect_custom_profile }}
      register: result_pam_authselect_select_profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: Ensure PAM Displays Last Logon/Access Notification - Restore the authselect
        features in the custom profile
      ansible.builtin.command:
        cmd: authselect enable-feature {{ item }}
      loop: '{{ result_authselect_features.stdout_lines }}'
      register: result_pam_authselect_restore_features
      when:
      - result_authselect_profile is not skipped
      - result_authselect_features is not skipped
      - result_pam_authselect_select_profile is not skipped

    - name: Ensure PAM Displays Last Logon/Access Notification - Ensure authselect
        changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - result_pam_authselect_restore_features is not skipped

    - name: Ensure PAM Displays Last Logon/Access Notification - Change the PAM file
        to be edited according to the custom authselect profile
      ansible.builtin.set_fact:
        pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
          | basename }}
      when:
      - authselect_custom_profile is defined
    when:
    - result_authselect_present.stat.exists

  - name: Ensure PAM Displays Last Logon/Access Notification - Define a fact for control
      already filtered in case filters are used
    ansible.builtin.set_fact:
      pam_module_control: optional

  - name: Ensure PAM Displays Last Logon/Access Notification - Check if expected PAM
      module line is present in {{ pam_file_path }}
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      regexp: ^\s*session\s+{{ pam_module_control | regex_escape() }}\s+pam_lastlog.so\s*.*
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_line_present

  - name: Ensure PAM Displays Last Logon/Access Notification - Include or update the
      PAM module line in {{ pam_file_path }}
    block:

    - name: Ensure PAM Displays Last Logon/Access Notification - Check if required
        PAM module line is present in {{ pam_file_path }} with different control
      ansible.builtin.lineinfile:
        path: '{{ pam_file_path }}'
        regexp: ^\s*session\s+.*\s+pam_lastlog.so\s*
        state: absent
      check_mode: true
      changed_when: false
      register: result_pam_line_other_control_present

    - name: Ensure PAM Displays Last Logon/Access Notification - Ensure the correct
        control for the required PAM module line in {{ pam_file_path }}
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: ^(\s*session\s+).*(\bpam_lastlog.so.*)
        replace: \1{{ pam_module_control }} \2
      register: result_pam_module_edit
      when:
      - result_pam_line_other_control_present.found == 1

    - name: Ensure PAM Displays Last Logon/Access Notification - Ensure the required
        PAM module line is included in {{ pam_file_path }}
      ansible.builtin.lineinfile:
        dest: '{{ pam_file_path }}'
        insertafter: ^\s*session.*include\s+common-session$
        line: session    {{ pam_module_control }}    pam_lastlog.so
      register: result_pam_module_add
      when:
      - result_pam_line_other_control_present.found == 0 or result_pam_line_other_control_present.found
        > 1

    - name: Ensure PAM Displays Last Logon/Access Notification - Ensure authselect
        changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present is defined
      - result_authselect_present.stat.exists
      - |-
        (result_pam_module_add is defined and result_pam_module_add.changed)
         or (result_pam_module_edit is defined and result_pam_module_edit.changed)
    when:
    - result_pam_line_present.found is defined
    - result_pam_line_present.found == 0

  - name: Ensure PAM Displays Last Logon/Access Notification - Define a fact for control
      already filtered in case filters are used
    ansible.builtin.set_fact:
      pam_module_control: optional

  - name: Ensure PAM Displays Last Logon/Access Notification - Check if the required
      PAM module option is present in {{ pam_file_path }}
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      regexp: ^\s*session\s+{{ pam_module_control | regex_escape() }}\s+pam_lastlog.so\s*.*\sshowfailed\b
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_module_display_login_attempts_option_present

  - name: Ensure PAM Displays Last Logon/Access Notification - Ensure the "showfailed"
      PAM option for "pam_lastlog.so" is included in {{ pam_file_path }}
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      backrefs: true
      regexp: ^(\s*session\s+{{ pam_module_control | regex_escape() }}\s+pam_lastlog.so.*)
      line: \1 showfailed
      state: present
    register: result_pam_display_login_attempts_add
    when:
    - result_pam_module_display_login_attempts_option_present.found is defined
    - result_pam_module_display_login_attempts_option_present.found == 0

  - name: Ensure PAM Displays Last Logon/Access Notification - Define a fact for control
      already filtered in case filters are used
    ansible.builtin.set_fact:
      pam_module_control: optional

  - name: Ensure PAM Displays Last Logon/Access Notification - Check if {{ pam_file_path
      }} file is present
    ansible.builtin.stat:
      path: '{{ pam_file_path }}'
    register: result_pam_file_present

  - name: Ensure PAM Displays Last Logon/Access Notification - Ensure the "silent"
      option from "pam_lastlog.so" is not present in {{ pam_file_path }}
    ansible.builtin.replace:
      dest: '{{ pam_file_path }}'
      regexp: (.*session.*{{ pam_module_control | regex_escape() }}.*pam_lastlog.so.*)\bsilent\b=?[0-9a-zA-Z]*(.*)
      replace: \1\2
    register: result_pam_option_removal
    when:
    - result_pam_file_present.stat.exists
  when: ( "pam" in ansible_facts.packages and ("kernel-default" in ansible_facts.packages
    or "kernel-default-base" in ansible_facts.packages) )
  tags:
  - CCE-85560-1
  - CJIS-5.5.2
  - DISA-STIG-SLES-15-020080
  - NIST-800-53-AC-9
  - NIST-800-53-AC-9(1)
  - PCI-DSS-Req-10.2.4
  - PCI-DSSv4-10.2
  - PCI-DSSv4-10.2.1
  - PCI-DSSv4-10.2.1.4
  - configure_strategy
  - display_login_attempts
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed