Support for AArch64 Scalable Matrix Extension in LLVM¶
1. Introduction¶
The AArch64 SME ACLE provides a number of attributes for users to control PSTATE.SM and PSTATE.ZA. The AArch64 SME ABI describes the requirements for calls between functions when at least one of those functions uses PSTATE.SM or PSTATE.ZA.
This document describes how the SME ACLE attributes map to LLVM IR attributes and how LLVM lowers these attributes to implement the rules and requirements of the ABI.
Below we describe the LLVM IR attributes and their relation to the C/C++ level ACLE attributes:
aarch64_pstate_sm_enabledis used for functions with
__attribute__((arm_streaming))aarch64_pstate_sm_compatibleis used for functions with
__attribute__((arm_streaming_compatible))aarch64_pstate_sm_bodyis used for functions with
__attribute__((arm_locally_streaming))and is only valid on function definitions (not declarations)aarch64_pstate_za_newis used for functions with
__attribute__((arm_new_za))aarch64_pstate_za_sharedis used for functions with
__attribute__((arm_shared_za))aarch64_pstate_za_preservedis used for functions with
__attribute__((arm_preserves_za))aarch64_expanded_pstate_zais used for functions with
__attribute__((arm_new_za))
Clang must ensure that the above attributes are added both to the function’s declaration/definition as well as to their call-sites. This is important for calls to attributed function pointers, where there is no definition or declaration available.
2. Handling PSTATE.SM¶
When changing PSTATE.SM the execution of FP/vector operations may be transferred to another processing element. This has three important implications:
The runtime SVE vector length may change.
The contents of FP/AdvSIMD/SVE registers are zeroed.
The set of allowable instructions changes.
This leads to certain restrictions on IR and optimizations. For example, it is undefined behaviour to share vector-length dependent state between functions that may operate with different values for PSTATE.SM. Front-ends must honour these restrictions when generating LLVM IR.
Even though the runtime SVE vector length may change, for the purpose of LLVM IR
and almost all parts of CodeGen we can assume that the runtime value for
vscale does not. If we let the compiler insert the appropriate smstart
and smstop instructions around call boundaries, then the effects on SVE
state can be mitigated. By limiting the state changes to a very brief window
around the call we can control how the operations are scheduled and how live
values remain preserved between state transitions.
In order to control PSTATE.SM at this level of granularity, we use function and callsite attributes rather than intrinsics.
Restrictions on attributes¶
It is undefined behaviour to pass or return (pointers to) scalable vector objects to/from functions which may use a different SVE vector length. This includes functions with a non-streaming interface, but marked with
aarch64_pstate_sm_body.It is not allowed for a function to be decorated with both
aarch64_pstate_sm_compatibleandaarch64_pstate_sm_enabled.It is not allowed for a function to be decorated with both
aarch64_pstate_za_newandaarch64_pstate_za_preserved.It is not allowed for a function to be decorated with both
aarch64_pstate_za_newandaarch64_pstate_za_shared.
These restrictions also apply in the higher level SME ACLE, which means we can emit diagnostics in Clang to signal users about incorrect behaviour.
Compiler inserted streaming-mode changes¶
The table below describes the transitions in PSTATE.SM the compiler has to account for when doing calls between functions with different attributes. In this table, we use the following abbreviations:
Nfunctions with a normal interface (PSTATE.SM=0 on entry, PSTATE.SM=0 on return)
Sfunctions with a Streaming interface (PSTATE.SM=1 on entry, PSTATE.SM=1 on return)
SCfunctions with a Streaming-Compatible interface (PSTATE.SM can be either 0 or 1 on entry, and is unchanged on return).
Functions with __attribute__((arm_locally_streaming)) are excluded from this
table because for the caller the attribute is synonymous to ‘streaming’, and
for the callee it is merely an implementation detail that is explicitly not
exposed to the caller.
From |
To |
Before call |
After call |
After exception |
|---|---|---|---|---|
N |
N |
|||
N |
S |
SMSTART |
SMSTOP |
|
N |
SC |
|||
S |
N |
SMSTOP |
SMSTART |
SMSTART |
S |
S |
SMSTART |
||
S |
SC |
SMSTART |
||
SC |
N |
If PSTATE.SM before call is 1, then SMSTOP |
If PSTATE.SM before call is 1, then SMSTART |
If PSTATE.SM before call is 1, then SMSTART |
SC |
S |
If PSTATE.SM before call is 0, then SMSTART |
If PSTATE.SM before call is 0, then SMSTOP |
If PSTATE.SM before call is 1, then SMSTART |
SC |
SC |
If PSTATE.SM before call is 1, then SMSTART |
Because changing PSTATE.SM zeroes the FP/vector registers, it is best to emit
the smstart and smstop instructions before register allocation, so that
the register allocator can spill/reload registers around the mode change.
The compiler should also have sufficient information on which operations are part of the call/function’s arguments/result and which operations are part of the function’s body, so that it can place the mode changes in exactly the right position. The suitable place to do this seems to be SelectionDAG, where it lowers the call’s arguments/return values to implement the specified calling convention. SelectionDAG provides Chains and Glue to specify the order of operations and give preliminary control over the instruction’s scheduling.
Example of preserving state¶
When passing and returning a float value to/from a function
that has a streaming interface from a function that has a normal interface, the
call-site will need to ensure that the argument/result registers are preserved
and that no other code is scheduled in between the smstart/smstop and the call.
define float @foo(float %f) nounwind {
%res = call float @bar(float %f) "aarch64_pstate_sm_enabled"
ret float %res
}
declare float @bar(float) "aarch64_pstate_sm_enabled"
The program needs to preserve the value of the floating point argument and
return value in register s0:
foo: // @foo
// %bb.0:
stp d15, d14, [sp, #-80]! // 16-byte Folded Spill
stp d13, d12, [sp, #16] // 16-byte Folded Spill
stp d11, d10, [sp, #32] // 16-byte Folded Spill
stp d9, d8, [sp, #48] // 16-byte Folded Spill
str x30, [sp, #64] // 8-byte Folded Spill
str s0, [sp, #76] // 4-byte Folded Spill
smstart sm
ldr s0, [sp, #76] // 4-byte Folded Reload
bl bar
str s0, [sp, #76] // 4-byte Folded Spill
smstop sm
ldp d9, d8, [sp, #48] // 16-byte Folded Reload
ldp d11, d10, [sp, #32] // 16-byte Folded Reload
ldp d13, d12, [sp, #16] // 16-byte Folded Reload
ldr s0, [sp, #76] // 4-byte Folded Reload
ldr x30, [sp, #64] // 8-byte Folded Reload
ldp d15, d14, [sp], #80 // 16-byte Folded Reload
ret
Setting the correct register masks on the ISD nodes and inserting the
smstart/smstop in the right places should ensure this is done correctly.
Instruction Selection Nodes¶
AArch64ISD::SMSTART Chain, [SM|ZA|Both], CurrentState, ExpectedState[, RegMask]
AArch64ISD::SMSTOP Chain, [SM|ZA|Both], CurrentState, ExpectedState[, RegMask]
The SMSTART/SMSTOP nodes take CurrentState and ExpectedState operand for
the case of a conditional SMSTART/SMSTOP. The instruction will only be executed
if CurrentState != ExpectedState.
When CurrentState and ExpectedState can be evaluated at compile-time
(i.e. they are both constants) then an unconditional smstart/smstop
instruction is emitted. Otherwise the node is matched to a Pseudo instruction
which expands to a compare/branch and a smstart/smstop. This is necessary to
implement transitions from SC -> N and SC -> S.
Unchained Function calls¶
When a function with “aarch64_pstate_sm_enabled” calls a function that is not
streaming compatible, the compiler has to insert a SMSTOP before the call and
insert a SMSTOP after the call.
If the function that is called is an intrinsic with no side-effects which in
turn is lowered to a function call (e.g. @llvm.cos()), then the call to
@llvm.cos() is not part of any Chain; it can be scheduled freely.
Lowering of a Callsite creates a small chain of nodes which:
starts a call sequence
copies input values from virtual registers to physical registers specified by the ABI
executes a branch-and-link
stops the call sequence
copies the output values from their physical registers to virtual registers
When the callsite’s Chain is not used, only the result value from the chained sequence is used, but the Chain itself is discarded.
The SMSTART and SMSTOP ISD nodes return a Chain, but no real
values, so when the SMSTART/SMSTOP nodes are part of a Chain that isn’t
used, these nodes are not considered for scheduling and are
removed from the DAG. In order to prevent these nodes
from being removed, we need a way to ensure the results from the
CopyFromReg can only be used after the SMSTART/SMSTOP has been
executed.
We can use a CopyToReg -> CopyFromReg sequence for this, which moves the value to/from a virtual register and chains these nodes with the SMSTART/SMSTOP to make them part of the expression that calculates the result value. The resulting COPY nodes are removed by the register allocator.
The example below shows how this is used in a DAG that does not link together the result by a Chain, but rather by a value:
t0: ch,glue = AArch64ISD::SMSTOP ...
t1: ch,glue = ISD::CALL ....
t2: res,ch,glue = CopyFromReg t1, ...
t3: ch,glue = AArch64ISD::SMSTART t2:1, .... <- this is now part of the expression that returns the result value.
t4: ch = CopyToReg t3, Register:f64 %vreg, t2
t5: res,ch = CopyFromReg t4, Register:f64 %vreg
t6: res = FADD t5, t9
We also need this for locally streaming functions, where an SMSTART needs to
be inserted into the DAG at the start of the function.
Functions with __attribute__((arm_locally_streaming))¶
If a function is marked as arm_locally_streaming, then the runtime SVE
vector length in the prologue/epilogue may be different from the vector length
in the function’s body. This happens because we invoke smstart after setting up
the stack-frame and similarly invoke smstop before deallocating the stack-frame.
To ensure we use the correct SVE vector length to allocate the locals with, we
can use the streaming vector-length to allocate the stack-slots through the
ADDSVL instruction, even when the CPU is not yet in streaming mode.
This only works for locals and not callee-save slots, since LLVM doesn’t support
mixing two different scalable vector lengths in one stack frame. That means that the
case where a function is marked arm_locally_streaming and needs to spill SVE
callee-saves in the prologue is currently unsupported. However, it is unlikely
for this to happen without user intervention, because arm_locally_streaming
functions cannot take or return vector-length-dependent values. This would otherwise
require forcing both the SVE PCS using ‘aarch64_sve_pcs’ combined with using
arm_locally_streaming in order to encounter this problem. This combination
can be prevented in Clang through emitting a diagnostic.
An example of how the prologue/epilogue would look for a function that is
attributed with arm_locally_streaming:
#define N 64
void __attribute__((arm_streaming_compatible)) some_use(svfloat32_t *);
// Use a float argument type, to check the value isn't clobbered by smstart.
// Use a float return type to check the value isn't clobbered by smstop.
float __attribute__((noinline, arm_locally_streaming)) foo(float arg) {
// Create local for SVE vector to check local is created with correct
// size when not yet in streaming mode (ADDSVL).
float array[N];
svfloat32_t vector;
some_use(&vector);
svst1_f32(svptrue_b32(), &array[0], vector);
return array[N - 1] + arg;
}
should use ADDSVL for allocating the stack space and should avoid clobbering the return/argument values.
_Z3foof: // @_Z3foof
// %bb.0: // %entry
stp d15, d14, [sp, #-96]! // 16-byte Folded Spill
stp d13, d12, [sp, #16] // 16-byte Folded Spill
stp d11, d10, [sp, #32] // 16-byte Folded Spill
stp d9, d8, [sp, #48] // 16-byte Folded Spill
stp x29, x30, [sp, #64] // 16-byte Folded Spill
add x29, sp, #64
str x28, [sp, #80] // 8-byte Folded Spill
addsvl sp, sp, #-1
sub sp, sp, #256
str s0, [x29, #28] // 4-byte Folded Spill
smstart sm
sub x0, x29, #64
addsvl x0, x0, #-1
bl _Z10some_usePu13__SVFloat32_t
sub x8, x29, #64
ptrue p0.s
ld1w { z0.s }, p0/z, [x8, #-1, mul vl]
ldr s1, [x29, #28] // 4-byte Folded Reload
st1w { z0.s }, p0, [sp]
ldr s0, [sp, #252]
fadd s0, s0, s1
str s0, [x29, #28] // 4-byte Folded Spill
smstop sm
ldr s0, [x29, #28] // 4-byte Folded Reload
addsvl sp, sp, #1
add sp, sp, #256
ldp x29, x30, [sp, #64] // 16-byte Folded Reload
ldp d9, d8, [sp, #48] // 16-byte Folded Reload
ldp d11, d10, [sp, #32] // 16-byte Folded Reload
ldp d13, d12, [sp, #16] // 16-byte Folded Reload
ldr x28, [sp, #80] // 8-byte Folded Reload
ldp d15, d14, [sp], #96 // 16-byte Folded Reload
ret
Preventing the use of illegal instructions in Streaming Mode¶
When executing a program in streaming-mode (PSTATE.SM=1) a subset of SVE/SVE2 instructions and most AdvSIMD/NEON instructions are invalid.
When executing a program in normal mode (PSTATE.SM=0), a subset of SME instructions are invalid.
Streaming-compatible functions must only use instructions that are valid when either PSTATE.SM=0 or PSTATE.SM=1.
The value of PSTATE.SM is not controlled by the feature flags, but rather by the
function attributes. This means that we can compile for ‘+sme’ and the compiler
will code-generate any instructions, even if they are not legal under the requested
streaming mode. The compiler needs to use the function attributes to ensure the
compiler doesn’t do transformations under the assumption that certain operations
are available at runtime.
We made a conscious choice not to model this with feature flags, because we still want to support inline-asm in either mode (with the user placing smstart/smstop manually), and this became rather complicated to implement at the individual instruction level (see D120261 and D121208) because of limitations in TableGen.
As a first step, this means we’ll disable vectorization (LoopVectorize/SLP)
entirely when the a function has either of the aarch64_pstate_sm_enabled,
aarch64_pstate_sm_body or aarch64_pstate_sm_compatible attributes,
in order to avoid the use of vector instructions.
Later on we’ll aim to relax these restrictions to enable scalable auto-vectorization with a subset of streaming-compatible instructions, but that requires changes to the CostModel, Legalization and SelectionDAG lowering.
We will also emit diagnostics in Clang to prevent the use of non-streaming(-compatible) operations, e.g. through ACLE intrinsics, when a function is decorated with the streaming mode attributes.
Other things to consider¶
Inlining must be disabled when the call-site needs to toggle PSTATE.SM or when the callee’s function body is executed in a different streaming mode than its caller. This is needed because function calls are the boundaries for streaming mode changes.
Tail call optimization must be disabled when the call-site needs to toggle PSTATE.SM, such that the caller can restore the original value of PSTATE.SM.
3. Handling PSTATE.ZA¶
In contrast to PSTATE.SM, enabling PSTATE.ZA does not affect the SVE vector length and also doesn’t clobber FP/AdvSIMD/SVE registers. This means it is safe to toggle PSTATE.ZA using intrinsics. This also makes it simpler to setup a lazy-save mechanism for calls to private-ZA functions (i.e. functions that may either directly or indirectly clobber ZA state).
For the purpose of handling functions marked with aarch64_pstate_za_new,
we have introduced a new LLVM IR pass (SMEABIPass) that is run just before
SelectionDAG. Any such functions dealt with by this pass are marked with
aarch64_expanded_pstate_za.
Setting up a lazy-save¶
Committing a lazy-save¶
Exception handling and ZA¶
4. Types¶
AArch64 Predicate-as-Counter Type¶
- Overview:
The predicate-as-counter type represents the type of a predicate-as-counter value held in a AArch64 SVE predicate register. Such a value contains information about the number of active lanes, the element width and a bit that tells whether the generated mask should be inverted. ACLE intrinsics should be used to move the predicate-as-counter value to/from a predicate vector.
There are certain limitations on the type:
The type can be used for function parameters and return values.
The supported LLVM operations on this type are limited to
load,store,phi,selectandallocainstructions.
The predicate-as-counter type is a scalable type.
- Syntax:
target("aarch64.svcount")