2025-02-24:	sle15-sp7-7.0.34.1
	- merge gh#openSUSE/linuxrc#336
	- fix segfault when reading autoinst.xml from installer medium
	  (bsc#1237524)

2024-07-08:	sle15-sp7-7.0.34.0
	- merge gh#openSUSE/linuxrc#334
	- switch to tty1 if framebuffer device becomes available - now on
	  all architectures (bsc#1225539)

2024-05-22:	sle15-sp7-7.0.32.8
	- merge gh#openSUSE/linuxrc#333
	- add 'repo' URL scheme to linuxrc (jsc#SLE-22578, jsc#SLE-24584)
	- ensure the device is passed to hd and disk Zypp schemes
	  (jsc#SLE-22578, jsc#SLE-24584)
	- add relative flag to url struct

2024-05-10:	sle15-sp5-7.0.32.7
	- merge gh#openSUSE/linuxrc#332
	- write /etc/locale.conf and /etc/vconsole.conf (bsc#1218621,
	  bsc#1222289)
	- update year in copyright message

2024-03-15:	sle15-sp5-7.0.32.6
	- merge gh#openSUSE/linuxrc#331
	- fix width of network device dialog (bsc#1221360)

2023-08-15:	sle15-sp5-7.0.32.5
	- merge gh#openSUSE/linuxrc#327
	- fix length of service type list field in SLP request (bsc#1213683)
	- add 'auto' query parameter to 'slp' url scheme (bsc#1213531)
	- use extended shell pattern matching for 'descr' and 'url' parameters
	- don't crash if 'quiet' url parameter has no value

2023-02-08:	sle15-sp5-7.0.32.4
	- merge gh#openSUSE/linuxrc#319
	- really parse 'firmwaretype' key (bsc#1208042)

2023-01-23:	sle15-sp5-7.0.32.3
	- merge gh#openSUSE/linuxrc#313
	- be careful switch_to_fb option takes care of textmode setting
	  (bsc#1206460)
	- merge gh#openSUSE/linuxrc#310
	- support more general wicked firmware devices interface
	  (jsc#PED-3118, jsc#PED-967)
	- add usenbft boot config setting (mainly to aid testing)
	- merge gh#openSUSE/linuxrc#316
	- fix buffer overflow in debug log (bsc#1207403)

2022-11-15:	sle15-sp5-7.0.32.2
	- merge gh#openSUSE/linuxrc#308
	- fix typo in HiperSocket (bsc#1198821)

2022-10-26:	sle15-sp5-7.0.32.1
	- merge gh#openSUSE/linuxrc#306
	- s390x: support PCI-attached networking device (jsc#PED-619)

2022-10-14:	sle15-sp5-7.0.32.0
	- merge gh#openSUSE/linuxrc#305
	- make s390x hypervisor setting configurable (for debugging)
	- s390x: remove deprecated ESCON support (jsc#PED-595)

2022-04-13:	sle15-sp5-7.0.31.7
	- merge gh#openSUSE/linuxrc#294
	- do not use zram if there's more than 64 GiB free memory (bsc#1197253)

2022-03-16:	sle15-sp4-7.0.31.6
	- merge gh#openSUSE/linuxrc#290
	- check also raid devices for install repo (bsc#1196061)
	- merge gh#openSUSE/linuxrc#292
	- do not leave repository mounted when starting yast (bsc#1196061)
	- improve url logging function
	- handle umount errors better

2022-02-02:	sle15-sp4-7.0.31.5
	- merge gh#openSUSE/linuxrc#284
	- s390x: ask for the VLAN id by default (jsc#SLE-18631)

2022-01-21:	sle15-sp4-7.0.31.4
	- merge gh#openSUSE/linuxrc#281
	- enable display dialog for all architectures
	- switch to tty1 if framebuffer device becomes available after
	  udevd startup (bsc#1193910, jsc#SLE-18632)
	- rework display menu
	- sanitize open file descriptors when starting yast
	- limit framebuffer switching to s390x
	- avoid error messages in running system

2021-11-25:	sle15-sp4-7.0.31.3
	- merge gh#openSUSE/linuxrc#279
	- allow option matching based on patterns (jsc#SLE-21308)

2021-11-19:	sle15-sp4-7.0.31.2
	- merge gh#openSUSE/linuxrc#277
	- Add support for gz and zst compressed modules (jsc#SLE-21256,
	  bsc#1192855)

2021-10-04:	sle15-sp4-7.0.31.1
	- merge gh#openSUSE/linuxrc#276
	- default to using zram (bsc#1191203, #bsc1189707)

2021-08-30:	sle15-sp4-7.0.31.0
	- merge gh#openSUSE/linuxrc#274
	- let curl figure out proper authentication method (jsc#SLE-17026)

2021-06-21:	sle15-sp4-7.0.30.5
	- merge gh#openSUSE/linuxrc#270
	- read rules.xml if autoyast option indicates a rules-based setup
	  (bsc#1187235)

2021-06-10:	sle15-sp3-7.0.30.4
	- merge gh#openSUSE/linuxrc#265
	- prevent memory corruption while iterating through network device
	  list (bsc#1187014)

2021-04-27:	sle15-sp3-7.0.30.3
	- merge gh#openSUSE/linuxrc#261
	- don't ask for ssh password if ssh.password.enc is set (bsc#1185304)

2021-04-26:	sle15-sp3-7.0.30.2
	- merge gh#openSUSE/linuxrc#258
	- fix handling of modules.order in driver updates (bsc#1184550)

2021-04-13:	sle15-sp3-7.0.30.1
	- merge gh#openSUSE/linuxrc#255
	- fix handling of modules in driver updates (bsc#1184550)

2021-03-11:	sle15-sp3-7.0.30.0
	- merge gh#openSUSE/linuxrc#250
	- add 'extend' option

2021-03-05:	7.0.29
	- merge gh#openSUSE/linuxrc#249
	- Revert "default to using zram"

2021-03-05:	7.0.28
	- merge gh#openSUSE/linuxrc#247
	- fix buffer overflow when setting up loop device (bsc#1180161)
	- adjust last remaining dubious strcpy use

2021-03-03:	7.0.27
	- merge gh#openSUSE/linuxrc#246
	- support using zram device as root file system
	- default to using zram
	- document install.inf entry

2021-01-21:	7.0.26
	- merge gh#openSUSE/linuxrc#244
	- cleanup module code to avoid static string buffers (bsc#1180792)
	- minor adjustments
	- merge gh#openSUSE/linuxrc#245
	- Replace splash with plymouth utils
	- Fix the wrong function name

2021-01-19:	7.0.25
	- merge gh#openSUSE/linuxrc#241
	- fix writing out of menu item array bounds (bsc#1180792)
	- use best fitting module config entry
	- update module loaded state properly
	- ensure modules are actually loaded in every code path
	- fix buffer overflow triggered by very long module descriptions

2021-01-13:	7.0.24
	- merge gh#openSUSE/linuxrc#239
	- fix detection of config file type (XML vs. plain text) bsc#1179936

2021-01-07:	7.0.23
	- merge gh#openSUSE/linuxrc#237
	- Since kernel 5.10, /sys/firmware/efi/vars has been dropped for
	  non-x86 architectures, only /sys/firmware/efi/efivars remains So,
	  check both to know if we are running on EFI boo#1180408

2020-12-02:	7.0.22
	- merge gh#openSUSE/linuxrc#234
	- do not offer --real-mode as kexec option in debug mode (bsc#1141875)

2020-10-28:	7.0.21
	- merge gh#openSUSE/linuxrc#232
	- fix linuxrc module option parsing

2020-10-28:	7.0.20
	- merge gh#openSUSE/linuxrc#231
	- add insmod.pre option to linuxrc (bsc#1174912)
	- fix potential buffer overflow (correctly detected by gcc)
	- don't use modprobe before modprobe config files are available

2020-10-23:	7.0.19
	- merge gh#openSUSE/linuxrc#230
	- add rfc2132 keyword to ifcfg option (jsc#SLE-15770, jsc#SLE-15488)

2020-06-24:	7.0.18
	- merge gh#openSUSE/linuxrc#225
	- s390: set rd.zdev=no-auto if auto-config has been turned off
	  (bsc#1168036)

2020-06-03:	7.0.17
	- merge gh#openSUSE/linuxrc#224
	- replace $releasever in URLs, similar to libzypp (bsc#1171018)

2020-05-14:	7.0.16
	- merge gh#openSUSE/linuxrc#223
	- udevadm is in /usr/bin (bsc#1171587)

2020-04-30:	7.0.15
	- merge gh#openSUSE/linuxrc#222
	- take care of url query parameters (bsc#1169492)
	- add autoyast.passurl option to linuxrc

2020-04-09:	7.0.14
	- merge gh#openSUSE/linuxrc#218
	- Update doc for hostname in different SLE versions
	- merge gh#openSUSE/linuxrc#221
	- Use long-named options for better readability

2020-04-06:	7.0.13
	- merge gh#openSUSE/linuxrc#220
	- make I/O device pre-configuration optional (bsc#1168036,
	  jsc#SLE-7396)
	- add check for pre-config data
	- change displayed texts to 'auto-configuration'

2020-04-02:	7.0.12
	- merge gh#openSUSE/linuxrc#219
	- parse 'try' keyword in ifcfg option (jsc#SLE-8965, jsc#SLE-9791)
	- move ifcfg option with 'try' to config.ifcfg.manual
	- fix iterating through device list
	- remove unused is_configured var
	- remove trailing space
	- fix travis setup

2020-03-06:	7.0.11
	- merge gh#openSUSE/linuxrc#216
	- fix rescue system setup (bsc#1160378)

2020-02-18:	7.0.10
	- merge gh#openSUSE/linuxrc#213
	- move plymouthd start after screen size detection (bsc#1163115)

2020-01-29:	7.0.9
	- merge gh#openSUSE/linuxrc#210
	- For bsc#1161701, Moved the logic to retrieve the platform name
	  into a subroutine, and moved the invocation of it until after the
	  call to lxrc_add_parts so that the squashfs files have been
	  loopback mounted.
	- For bsc#1161701, Moved the logic to retrieve the platform name
	  into a subroutine, and moved the invocation of it until after the
	  call to lxrc_add_parts so that the squashfs files have been
	  loopback mounted. Move the definition for the platform variable
	  outside the ifdef. Replace a direct assignment to platform with a
	  call to str_copy.
	- Modified the startup message from "1996-2019" to "1996-2020"

2020-01-24:	7.0.8
	- merge gh#openSUSE/linuxrc#209
	- rework 'extend' command to log and report an error if linuxrc
	  unexpectedly crashes (bsc#1158996)
	- Append RPM_OPT_FLAGS to CFLAGS.

2019-12-13:	7.0.7
	- merge gh#openSUSE/linuxrc#207
	- Revert "Append RPM_OPT_FLAGS to CFLAGS."

2019-12-10:	7.0.6
	- merge gh#openSUSE/linuxrc#206
	- For jsc#SLE-9474, Added logic to linuxrc.c and util.c to retrieve
	  the name of the processor linuxrc is running on, for mainframe
	  systems only.

2019-12-05:	7.0.5
	- merge gh#openSUSE/linuxrc#204
	- Append RPM_OPT_FLAGS to CFLAGS.

2019-12-05:	7.0.4
	- merge gh#openSUSE/linuxrc#205
	- Fix building with -fno-common.

2019-11-28:	7.0.3
	- merge gh#openSUSE/linuxrc#200
	- fix 'label' URL scheme parsing

2019-11-28:	7.0.2
	- merge gh#openSUSE/linuxrc#199
	- fix URL parsing (bsc#1156967)
	- re-parse URLs after udevd has been started (bsc#1156967)

2019-11-19:	7.0.1
	- merge gh#openSUSE/linuxrc#198
	- ensure autoyast url is passed to yast when autoyast2 option is
	  used (bsc#1157031)

2019-10-23:	7.0.0
	- merge gh#openSUSE/linuxrc#196
	- show debug info also on console device
	- fix reading slp data
	- show both autoyast and autoyast2 options on linuxrc info page
	- support autoyast-style URL syntax
	- read and parse autoyast file
	- add needed entries to global config struct
	- add new autoyast.parse key
	- parse autoyast/autoyast2 options and add new autoyast url schemes
	- activate new autoyast code
	- fix parsing linuxrc options embedded in AutoYaST file (bsc#1145574)
	- document autoyast option behavior
	- small additions to autoyast handling doc

2019-09-24:	6.0.15
	- merge gh#openSUSE/linuxrc#195
	- add support for compressed modules

2019-08-15:	6.0.14
	- merge gh#openSUSE/linuxrc#193
	- choose correct kernel image on aarch64 (bsc#1145625)

2019-07-19:	6.0.13
	- merge gh#openSUSE/linuxrc#192
	- Added support for a multi-repository installation medium
	  (bsc#1141889)
	- Travis CI: Use the Docker image from OBS
	- Updated linuxrc_repo.md documentation

2019-07-17:	6.0.12
	- merge gh#openSUSE/linuxrc#191
	- Disable MD/RAID auto-assembly by default (bsc#1132688)

2019-05-29:	6.0.11
	- merge gh#openSUSE/linuxrc#189
	- iterate through device list in sorted order (bsc#1058039)

2019-05-02:	6.0.10
	- merge gh#openSUSE/linuxrc#188
	- add 'autoassembly' boot option to prevent MD/RAID autoassembly
	  (bsc#1132688)
	- simplify code

2019-03-19:	6.0.9
	- merge gh#openSUSE/linuxrc#187
	- fix network dialog workflow when VLAN is active (bsc#1124654)
	- add more logging in test mode
	- add a bit of explanation

2019-03-18:	6.0.8
	- merge gh#openSUSE/linuxrc#186
	- Fix usage of a out-of-scope vector constructor.

2019-03-01:	6.0.7
	- merge gh#openSUSE/linuxrc#185
	- adjust copyright year (bsc#1127464)

2019-02-20:	6.0.6
	- merge gh#openSUSE/linuxrc#184
	- Setting manual=0 in install.inf
	- Setting manual=0 in install.inf (bsc#1055667)

2018-11-28:	6.0.5
	- merge gh#openSUSE/linuxrc#183
	- Added parameter norepo (fate#325482)

2018-11-27:	6.0.4
	- merge gh#openSUSE/linuxrc#182
	- Added new BuildRequires to devel doc

2018-11-14:	6.0.3
	- merge gh#openSUSE/linuxrc#181
	- setctsid is dead, long live setsid (bsc#1109290)

2018-09-10:	6.0.2
	- merge gh#openSUSE/linuxrc#180
	- request s390 network device dialog only if really needed
	  (bsc#1106466)

2018-07-16:	6.0.1
	- merge gh#openSUSE/linuxrc#177
	- add check_media() function (bsc#1000947, bsc#1036004)
	- run check_media() _before_ locating the repository
	- move mediacheck from expert settings to install menu
	- fix docker setup

2018-07-02:	6.0.0
	- merge gh#openSUSE/linuxrc#176
	- rewrite digest_media_verify() to use new mediacheck lib
	  (bsc#1000947)
	- adjust Makefile
	- fix minor linemode issue
	- replace all remaining digest calculation in linuxrc with
	  libmediacheck calls
	- code adjustments

2018-06-19:	5.1.14
	- merge gh#openSUSE/linuxrc#173
	- address some gcc warnings

2018-06-19:	5.1.13
	- merge gh#openSUSE/linuxrc#171
	- don't impose limits on /proc/cmdline size (bsc#1092154)
	- merge gh#openSUSE/linuxrc#170
	- Eliminate chance of read() hang on size check

2018-05-30:	5.1.12
	- merge gh#openSUSE/linuxrc#169
	- write s390 config values into /boot/zipl/active_devices.txt
	  (bsc#1095062)

2018-04-20:	5.1.11
	- merge gh#openSUSE/linuxrc#168

2018-04-18:	5.1.10
	- activate s390 devices when reading driver updates via nfs & cifs
	  (bsc#1089937)

2018-04-11:	5.1.9
	- merge gh#openSUSE/linuxrc#167
	- kexec uses '-a' option now (bsc#1076839)

2018-03-26:	5.1.8
	- merge gh#openSUSE/linuxrc#166
	- Fix for bsc#1085860 Change chzdev call to conform to documented
	  syntax

2018-03-15:	5.1.7
	- merge gh#openSUSE/linuxrc#165
	- be carefull with 'kexec -s', it's not always available (bsc#1076839)

2018-02-26:	5.1.6
	- merge gh#openSUSE/linuxrc#164
	- fix code flow (bsc#1082468)

2018-02-07:	5.1.5
	- merge gh#openSUSE/linuxrc#156
	- Don't include RPC headers if we don't need them. RPC is
	  deprecated in glibc.

2018-01-11:	5.1.4
	- merge gh#openSUSE/linuxrc#163
	- extend 'kexec' option to allow updating kernel/initrd only if
	  necessary (bsc#990374)

2018-01-10:	5.1.3
	- merge gh#openSUSE/linuxrc#162
	- allow kexec to work with secure boot (bsc#1075051)
	- adjust copyright notice

2017-12-14:	5.1.2
	- merge gh#openSUSE/linuxrc#161
	- fix network interface handling (bnc#1068336)

2017-12-05:	5.1.1
	- merge gh#openSUSE/linuxrc#160
	- read digests also from CHECKSUMS file
	- adjust date

2017-11-27:	5.1.0
	- merge gh#openSUSE/linuxrc#159
	- try harder to find a suitable network interface (bsc#1068336)

2017-11-17:	5.0.116
	- merge gh#openSUSE/linuxrc#158
	- squashfs.ko might depend on zstd_decompress

2017-11-09:	5.0.115
	- merge gh#openSUSE/linuxrc#155
	- update broken module config even if list is empty

2017-11-06:	5.0.114
	- merge gh#openSUSE/linuxrc#153
	- Updates for fate#322567 Changed *_configure calls to chzdev calls
	  with the --no-root-update option so that we won't run into
	  problems in the initrd environment.

2017-10-24:	5.0.113
	- merge gh#openSUSE/linuxrc#152
	- Revert "Fate322567"

2017-10-23:	5.0.112
	- merge gh#openSUSE/linuxrc#151
	- Support "media_upgrade=1" boot option, pass it to YaST
	  (fate#323163)
	- Update git2log script
	- Initial Travis support, added a simple smoke test
	- Fix a GCC warning

2017-10-20:	5.0.111
	- merge gh#openSUSE/linuxrc#150
	- Changed zfcp_host_configure, zfcp_disk_configure, ctc_configure
	  and qeth_configure calls to the new chzdev command, per
	  fate#322567.
	- Corrected two syntax errors in the chzdev command for qeth
	  devices. Signed off: Mark Post (mpost@suse.com)

2017-10-06:	5.0.110
	- merge gh#openSUSE/linuxrc#149
	- fix segfault when using an invalid url scheme (bsc#1061824)
	- show error message when reading an 'info' or 'autoyast2' url fails

2017-09-26:	5.0.109
	- merge gh#openSUSE/linuxrc#148
	- clarify SetHostname option usage

2017-09-25:	5.0.108
	- merge gh#openSUSE/linuxrc#147
	- add SetHostnameUsed entry to install.inf (bsc#1054933)

2017-09-20:	5.0.107
	- merge gh#openSUSE/linuxrc#146
	- pass SetHostname setting to install.inf

2017-09-12:	5.0.106
	- merge gh#openSUSE/linuxrc#141
	- sort input files (boo#1041090)

2017-08-30:	5.0.105
	- merge gh#openSUSE/linuxrc#145
	- README.BETA accessible during installation

2017-06-16:	5.0.104
	- merge gh#openSUSE/linuxrc#143
	- set kernel and initrd to use with kexec option (bsc#1044683)

2017-05-22:	5.0.103
	- merge gh#openSUSE/linuxrc#140
	- enforce linuxrc's maximum screen dimensions properly
	  (bsc#1027354)
	- increase maximun screen size to cover at least 4k displays

2017-04-28:	5.0.102
	- merge gh#openSUSE/linuxrc#139
	- read license.tar.gz from repomd repositories (fate#322286)
	- some small fixes

2017-04-25:	5.0.101
	- merge gh#openSUSE/linuxrc#138
	- enhance linuxrc documentation

2017-04-13:	5.0.100
	- merge gh#openSUSE/linuxrc#137
	- fix segfault when loading installer (bsc#1033441)

2017-02-10:	5.0.99
	- merge gh#openSUSE/linuxrc#136
	- match only file name, not path when checking digests
	- avoid segfault when image files are missing

2017-01-19:	5.0.98
	- merge gh#openSUSE/linuxrc#135
	- allow reading of config files from instsys location, part 2

2017-01-18:	5.0.97
	- merge gh#openSUSE/linuxrc#134
	- allow reading of config files from instsys location (/boot/ARCH/)
	  (fate#322283)
	- extend repo documentation
	- make md parser happy
	- avoid passing uninitialized value

2017-01-13:	5.0.96
	- merge gh#openSUSE/linuxrc#133
	- have linuxrc accept plain repomd repo as install source
	  (fate#322286)
	- document linuxrc's repo handling

2016-12-21:	5.0.95
	- merge gh#openSUSE/linuxrc#132
	- add linuxrc.core option to enable core dumps in linuxrc (to debug
	  bsc#1010505)
	- cleanup include list in install.c

2016-12-21:	5.0.94
	- merge gh#openSUSE/linuxrc#66
	- Generated a config for Doxygen.
	- Tuned Doxygen.
	- Document code
	- Marked comments for Doxygen inclusion

2016-12-16:	5.0.93
	- merge gh#openSUSE/linuxrc#131
	- Factored out update_sysconfig
	- Derive filename_tmp instead of passing it as an argument.
	- Write DHCLIENT_SET_HOSTNAME globally (bsc#1013605)

2016-11-30:	5.0.92
	- merge gh#openSUSE/linuxrc#130
	- shared libraries mentioned in README
	- Described symptoms of missing shared libraries
	- more verbose shared library matching description

2016-11-28:	5.0.91
	- merge gh#openSUSE/linuxrc#120
	- added dependencies to README

2016-11-24:	5.0.90
	- merge gh#openSUSE/linuxrc#128
	- keep rsyslogd running

2016-11-24:	5.0.89
	- merge gh#openSUSE/linuxrc#127
	- Implemented Loghost functionality

2016-11-18:	5.0.88
	- merge gh#openSUSE/linuxrc#126
	- Clean up: removed "regcert", "smturl" and "smtcert" options.
	  (bsc#943966)

2016-10-14:	5.0.87
	- merge gh#openSUSE/linuxrc#123

2016-10-14:	sle12-sp2-5.0.86
	- merge gh#openSUSE/linuxrc#122
	- parse netwait option earlier (bsc#995304)

2016-09-30:	5.0.86
	- merge gh#openSUSE/linuxrc#119

2016-09-30:	sle12-sp2-5.0.85
	- merge gh#openSUSE/linuxrc#118
	- don't configure ibft devices in linuxrc (bsc#997598)

2016-09-13:	5.0.85
	- merge gh#openSUSE/linuxrc#115
	- Unify keymaps with YaST after recent changes in yast2-country
	- Don't enforce keymap conversion to unicode

2016-07-13:	5.0.84
	- merge gh#openSUSE/linuxrc#114
	- fix reading instsys id (related to bsc#974601)

2016-06-22:	5.0.83
	- merge gh#openSUSE/linuxrc#113
	- document XVideo option (bsc#974821)

2016-06-14:	5.0.82
	- merge gh#openSUSE/linuxrc#112
	- restore standard IO file descriptors when returning from external
	  shell (bsc#983014)

2016-05-18:	5.0.81
	- merge gh#openSUSE/linuxrc#110
	- activate AutoUpgrade if Upgrade + AutoYaST are set (bsc#978252)

2016-05-18:	5.0.80
	- merge gh#openSUSE/linuxrc#109
	- Updated the copyright information that is displayed on the
	  console.
	- Added definition for win variable used by dia_info
	- Converted multiple dialog calls to one
	- Removed unnecessary definition for win

2016-05-17:	5.0.79
	- merge gh#openSUSE/linuxrc#107
	- ensure the correct interfaces are (de-)activated when using vlan
	  tagging (bsc#971166)

2016-05-17:	5.0.78
	- merge gh#openSUSE/linuxrc#108
	- sanitize hostname handling (fate#319639)

2016-04-25:	5.0.77
	- merge gh#openSUSE/linuxrc#106
	- remove O_TMPFILE workaround needed for bsc#964709 and bsc#965068

2016-03-31:	5.0.76
	- merge gh#openSUSE/linuxrc#89
	- Do not limit number of inodes in tmpfs overlay (bsc#951015)

2016-03-14:	5.0.75
	- merge gh#openSUSE/linuxrc#104
	- fix network url handling (fate#318899)

2016-03-14:	5.0.74
	- merge gh#openSUSE/linuxrc#103
	- Made the following changes for fate#320112 Removed all the code
	  that asks for an OSA Portname If a Portname is found in the
	  parameters, output a message saying it's deprecated Updated
	  linuxrc.html to indicate that Portname is deprecated Updated
	  linuxrc.html to also indicate that OsaMedium was deprecated,
	  since people are still specifying it

2016-03-14:	5.0.73
	- merge gh#openSUSE/linuxrc#102
	- Add SelfUpdate parameter (fate#319716)
	- Uses a string to store self.self_update_url
	- Writes Insecure parameter in install.inf
	- Simplify calculation of Insecure value in /etc/install.inf
	- Bring back Insecure documentation

2016-02-18:	5.0.72
	- merge gh#openSUSE/linuxrc#100
	- introduce externally handled URL schemes
	- consolidate handling of url properties
	- implement user-defined mountable url schemes
	- add doc for user-defined urls
	- user-defined urls: add linuxrc menus for local urls
	- user-defined urls: add linuxrc menus for network urls
	- handle empty path component in url
	- fix extension handling
	- improve user-defined url doc (fate#318899)

2016-02-12:	5.0.71
	- merge gh#openSUSE/linuxrc#99
	- Workaround O_TMPFILE definition on SLE12 / aarch64 (bsc#965068)

2016-02-05:	5.0.70
	- merge gh#openSUSE/linuxrc#98
	- allow commas in nameserver option for compatibility (bsc#965293)

2016-02-03:	5.0.69
	- merge gh#openSUSE/linuxrc#96
	- workaround: include O_DIRECTORY so open(, O_TMPFILE) works on
	  ppc64 (bsc#964709)

2016-01-28:	5.0.68
	- merge gh#openSUSE/linuxrc#93
	- fix routing config when using vlan (bsc#961624)
	- ensure we activate the correct interface when using vlan

2016-01-27:	5.0.67
	- merge gh#openSUSE/linuxrc#94
	- Modified file.c to only accept valid types of OsaInterface
	  (bsc#937437)

2016-01-26:	5.0.66
	- documented linuxrc/yast interface

2016-01-19:	5.0.65
	- merge branch master

2016-01-19:	5.0.64
	- squashfs.ko might depend on lz4_decompress (bsc#962493)
	- Removed the prompt for portname when configuring LCS interfaces
	  (bsc#956603)

2015-11-23:	5.0.63
	- merge gh#openSUSE/linuxrc#92
	- rewrite linuxrc logging function
	- remove old stderr handling code
	- log also function names
	- fix typo
	- document new logging behavior
	- adjust buffer size to sane value

2015-11-09:	5.0.62
	- merge gh#openSUSE/linuxrc#91
	- fix wifi support in linuxrc (bsc#949938)
	- remove obsolete code

2015-10-21:	5.0.61
	- merge gh#openSUSE/linuxrc#90
	- skip also hostname check when sslcerts option is 0 (bsc#951001)

2015-10-08:	5.0.60
	- merge gh#openSUSE/linuxrc#87
	- ensure ifcfg options don't get lost (bsc#948774)

2015-10-02:	5.0.59
	- merge gh#openSUSE/linuxrc#86
	- put udev modprobe rules file into /run so it doesn't get copied
	  into the final system (bsc#947807)

2015-09-29:	5.0.58
	- merge gh#openSUSE/linuxrc#85
	- Add documentation about how the project is sent to the distribution

2015-09-16:	5.0.57
	- merge gh#openSUSE/linuxrc#84
	- get rid of 'no job control' bash messages (bsc#945607)

2015-09-15:	5.0.56
	- merge gh#openSUSE/linuxrc#83
	- Added hwaddr to netdevice identifier (bsc#944347)

2015-09-14:	5.0.55
	- merge gh#openSUSE/linuxrc#81
	- fix segfault when asking for module params (bsc#945608)
	- fix typo
	- further simplify module param code

2015-09-07:	5.0.54
	- merge gh#openSUSE/linuxrc#80
	- s390x: keep ssh active when selecting vnc (bsc#943744)

2015-09-07:	5.0.53
	- merge gh#openSUSE/linuxrc#79
	- s390x: in install type dialog, make vnc & ssh mutually exclusive
	  (bsc#943744)
	- fix typo

2015-09-02:	5.0.52
	- merge gh#openSUSE/linuxrc#78
	- s390x: treat virtio network device as 'normal' network device
	  (bsc#943743)

2015-08-12:	5.0.51
	- merge gh#openSUSE/linuxrc#76
	- s390x: in kvm, don't ask for net device type

2015-08-11:	5.0.50
	- s390x: handle kvm virtio devices

2015-08-10:	5.0.49
	- merge gh#openSUSE/linuxrc#75
	- with netsetup=dhcp,all, do network setup at once, else we'll
	  never get it done (bsc#932692)
	- adjust git log parser

2015-07-28:	5.0.48
	- merge gh#openSUSE/linuxrc#74
	- add 'sethostname' option to have wicked set the hostname (bsc#934118)

2015-07-22:	5.0.47
	- merge gh#openSUSE/linuxrc#73
	- copy modprobe disabling udev rule to the correct place (bsc#938774)
	- change company name to SUSE LLC (bsc#938747, fate#319294)

2015-06-25:	5.0.46
	- merge gh#openSUSE/linuxrc#72
	- avoid any interactive dialogs when checking the digest of files
	  during an 'extend' command (bsc#936068)

2015-06-24:	5.0.45
	- merge gh#openSUSE/linuxrc#71
	- changed 'media not found' message into a dialog letting the user
	  select the URL to retry (bsc#923918)
	- re-arrange code a bit and fix typo

2015-06-03:	5.0.44
	- merge gh#openSUSE/linuxrc#70
	- reimplement 'boot installed system' option (bsc#906990)
	- menu is directly reachable via systemboot=1 boot option
	- don't use --real-mode kexec option when booted via uefi
	- added comments & prototypes
	- some minor corrections

2015-05-28:	5.0.43
	- merge gh#openSUSE/linuxrc#69
	- Update README.md

2015-05-25:	5.0.42
	- merge gh#openSUSE/linuxrc#68
	- do not display an error message after aborting YaST (bsc#614829)

2015-05-15:	5.0.41
	- merge gh#openSUSE/linuxrc#67
	- ensure driver update medium is unmounted before applying it
	  (bsc#892932)

2015-05-11:	5.0.40
	- merge gh#openSUSE/linuxrc#63

2015-05-08:	5.0.38
	- really setup next network interface when probing for a working
	  one (bsc#928965)

2015-05-08:	5.0.39
	- merge gh#openSUSE/linuxrc#64
	- Fixed `make TAGS`.
	- removed an obsolete file
	- Documented testing with mksusecd.

2015-04-23:	5.0.37
	- re-enable utf8 mode when linemode is switched off (bnc#921112)

2015-04-23:	5.0.36
	- merge gh#openSUSE/linuxrc#58
	- Fix BOOTIF on PowerNV
	- merge gh#openSUSE/linuxrc#59
	- add a debugging hint into readme
	- add paragraph about logging
	- Add note about passing cli options

2015-04-02:	5.0.35
	- merge gh#openSUSE/linuxrc#57
	- match mac addresses case-insensitive (bnc#924872)

2015-03-18:	5.0.34
	- merge gh#openSUSE/linuxrc#56
	- track also improper driver updates (bnc#901598)
	- verify also rpm signatures
	- update copyright string

2015-03-09:	5.0.33
	- merge gh#openSUSE/linuxrc#54
	- don't set a default keymap too eagerly (bnc#857194)

2015-03-05:	5.0.32
	- merge gh#openSUSE/linuxrc#50
	- allow files to be signed directly
	- show error message for failed driver update loads (bnc#901598)
	- warn if driver update didn't contain usable data
	- quote filenames

2015-02-05:	5.0.31
	- merge gh#openSUSE/linuxrc#48
	- keep default nanny setting unless explicitly changed
	- update git2log script

2015-01-14:	5.0.30
	- merge gh#openSUSE/linuxrc#44
	- improve git2log to work in sub-branches
	- activate newly added interfaces (bnc#906817)
	- merge gh#openSUSE/linuxrc#43
	- gpg 2.1.1 became stricter with the usage of --verify:

2014-12-01:	5.0.29
	- merge gh#openSUSE/linuxrc#41
	- use correct mount command location

2014-11-26:	5.0.28
	- merge gh#openSUSE/linuxrc#39
	- set explicit route to gateway (if outside subnet) (bnc#906771)

2014-10-13:	5.0.27
	- update git2log script

2014-09-29:	5.0.26
	- merge gh#openSUSE/linuxrc#36
	- keep wpa_supplicant running

2014-09-29:	5.0.25
	- merge gh#openSUSE/linuxrc#35
	- handle ifcfg options also when using dhcp

2014-09-29:	5.0.24
	- Correct check for value of config.hwp.layer2 Add check for
	  virtual NICs to not write LLADDR to ifcfg.
	- merge gh#openSUSE/linuxrc#34
	- improve last commit a bit

2014-09-26:	5.0.23
	- merge gh#openSUSE/linuxrc#33
	- s390x: revert hypervisor check (bnc 887238)

2014-09-24:	5.0.22
	- use improved git2log script
	- add 'archive' target to Makefile
	- keep going without tags
	- merge gh#openSUSE/linuxrc#32
	- s390x: store MAC address for layer2 devices in ifcfg (bnc#887238)
	- s390x: write LLADDR only on LPAR

2014-09-18:	5.0.21
	- merge gh#openSUSE/linuxrc#31
	- add sshkey option tp support ssh pubkey authentication
	  (bnc#230781, bnc#421340)

2014-09-18:	5.0.20
	- merge gh#openSUSE/linuxrc#30
	- make ifcfg=dhcp{4,6} work as expected

2014-09-17:	5.0.19
	- merge gh#openSUSE/linuxrc#29
	- remove dead code
	- don't check autoinst.xml digest (bnc#895670)
	- remove unnecessary check

2014-09-15:	5.0.18
	- merge gh#openSUSE/linuxrc#28
	- moved edd.ko loading into udev start script (bnc#871617)

2014-09-12:	5.0.17
	- merge gh#openSUSE/linuxrc#27
	- finalize ifcfg option parsing

2014-09-11:	5.0.16
	- merge gh#openSUSE/linuxrc#25
	- increased memory thrreshold for loading inst-sys to RAM
	  (bnc#893982)
	- merge gh#openSUSE/linuxrc#26
	- look for autoinst.xml and keep the name (don't use autoyast.xml
	  internally; fate#316530)
	- fix missing parameter to dia_input2()

2014-08-18:	5.0.15
	- merge gh#openSUSE/linuxrc#24
	- fix dialog window creation
	- fix nfs & cifs mounts (bnc#890172)
	- s390x: don't resolve name of x11 server
	- add comment
	- clarify return code

2014-08-15:	5.0.14
	- merge gh#openSUSE/linuxrc#23
	- add vlan dialog
	- fix net_input_vlanid()

2014-08-14:	5.0.13
	- add 'nanny' option to control wickedd-nanny; disable by default

2014-08-11:	5.0.12
	- merge gh#openSUSE/linuxrc#21
	- netsetup=dhcp didn't work (bnc#890874, bnc#889887)
	- reactivate netsetup=dhcp,all (bnc#891080)

2014-08-08:	5.0.11
	- merge gh#openSUSE/linuxrc#20
	- Enhance linuxrc network code a bit.

2014-08-06:	5.0.10
	- merge gh#openSUSE/linuxrc#19
	- free screen memory only after we allocated it
	- extend debugwait syntax
	- apply netwait also to static setup
	- add wicked.timeout as alias to dhcp.timeout
	- add new 'sshd' option to start sshd during install but don't
	  trigger a ssh installation

2014-08-04:	5.0.9
	- merge gh#openSUSE/linuxrc#18
	- Unify password handling and add password.enc option to pass
	  encrypted passwords.
	- explicitly set CURLOPT_IPRESOLVE to debug/workaround resolve
	  issues (bnc#889981)

2014-07-31:	5.0.8
	- merge gh#openSUSE/linuxrc#16
	- fix point-to-point interface handling (bnc#889580)

2014-07-30:	5.0.7
	- merge gh#openSUSE/linuxrc#14
	- Read me.
	- merge gh#openSUSE/linuxrc#15
	- pass along hostname if explicitly set (bnc#889374)

2014-07-28:	5.0.6
	- merge gh#openSUSE/linuxrc#13
	- make log file script behave
	- make debugwait option more useful
	- fix evil nameserver config bug
	- more dead code cleanup
	- add missing break

2014-07-25:	5.0.5
	- merge gh#openSUSE/linuxrc#12
	- remove obsolete config.netdevice
	- remove more parts of old network code

2014-07-23:	5.0.4
	- remove obsolete pcmcia code
	- don't write network info into /etc/install.inf
	- remove sax2 option
	- remove obsolete yast2_color var
	- ui directly uses new network code, remove obsolete code

2014-07-23:	5.0.3
	- fix network setup

2014-07-21:	5.0.2
	- better internal logging of network config entries
	- put copy of old-style config into new config
	- support ptp setups and accept global default netmask value for
	  all ips
	- use wicked to setup static network config

2014-07-18:	5.0.1
	- continue network code reworking

2014-07-17:	5.0.0
	- fix proxy handling in linuxrc

2014-07-16:	4.2.45
	- fix segfault and accept ipv6 netmasks (bnc 887501)
	- clean up nfs code
	- clean up cifs and nfs code
	- enable ipv6 by default
	- don't resolve proxy name
	- avoid server name resolution

2014-07-10:	4.2.44
	- bot options: make plymouth.enable an alias to plymouth (bnc#886136)
	- rewrote ibft parser
	- added 'defaultrepo' option to specify the repos to try if there's
	  no 'install' option given

2014-07-08:	4.2.43
	- fix typo
	- ifcfg: prefer explicitly named interfaces over wildcard patterns
	- fix iscsi detection (bnc#886053)
	- better efford at determining dhcp config state (bnc#885907)

2014-07-07:	4.2.42
	- fix last patch

2014-07-07:	4.2.41
	- code cleanup: better wicked integration, removed obsolete code

2014-07-04:	4.2.40
	- read linuxrc config also from /etc/linuxrc.d
	- merge gh#openSUSE/linuxrc#11
	- Revert to previous handling of config.hwp.layer2 variable. Try to
	  document why we're using something other than 0 and 1 for values
	  for layer2, protocol, and portno.

2014-07-03:	4.2.39
	- reworked ifcfg option to support vlan and setting arbirary config
	  file entries
	- more logging for fcoe and efi detection
	- log linuxrc version & date

2014-07-02:	4.2.38
	- merge gh#openSUSE/linuxrc#10
	- Check for a selection of 0 when returning from dia_list to choose
	  the network device.

2014-07-01:	4.2.37
	- added new 'ifcfg' option to configure network
	- move udev start script to /script dir

2014-06-25:	4.2.36
	- ignore ibft data if we can't find a matching interface
	  (bnc#883712, bnc#874795)
	- tag ibft interface as persistent

2014-06-24:	4.2.35
	- keep network config for rescue system and pass ssh options
	  (bnc#882844)

2014-06-23:	4.2.34
	- stick to ascii language names (bnc#881440)
	- add separate upgrade option to linuxrc

2014-06-17:	4.2.33
	- don't kill haveged (bnc#875848)

2014-06-06:	4.2.32
	- fix s390x network setup properly (bnc#881342)

2014-06-05:	4.2.31
	- s390x: wait 3s after loading qeth module

2014-05-30:	4.2.30
	- merge gh#openSUSE/linuxrc#9
	- s390: choose thermonuclear option to deal with whitespace issues
	  once and for all (bnc#706605)
	- s390: allow empty parameters for portname, portno and osahwaddr
	  (bnc#720765)

2014-05-22:	4.2.29
	- turn default ipv6 off again (bnc#879127)

2014-05-21:	4.2.28
	- redirect all wicked output to stderr
	- rework dhcp handling, ipv6 should be fine now (bnc#868031)
	- potential fix for memory corruption (bnc#878357)
	- actually parse autoyast2 file

2014-05-16:	4.2.27
	- Missed one instance of config.hwp.layer2 that needed to be
	  updated.

2014-05-16:	4.2.26
	- pass debug option to help scripts

2014-05-15:	4.2.25
	- suppress edd failed message

2014-05-15:	4.2.24
	- message
	- Revert "Initial changes to use IBM-supplied chzdev command
	  instead of our *_configure commands."
	- merge gh#openSUSE/linuxrc#8
	- Fix the insane handling of the layer2 parameter. Just use the 0
	  or 1 that the kernel understands.
	- Fix for bnc#855696
	- Only ask if DHCP is to be used for Layer 2 interfaces.
	- If a inteface is already defined, check sysfs to find out if it
	  is layer 2 or not and set config.hwp.layer2 accordingly.
	- Move check for config.hwp.layer2 to the correct line.
	- Adjust the branch to match the current master.
	- fix compilation

2014-05-08:	4.2.23
	- don't load any fonts anymore (bnc#875592)

2014-05-08:	4.2.22
	- move fcoe & iscsi detection to a place where all required modules
	  have been loaded (bnc#874522)

2014-05-02:	4.2.21
	- iscsi detection also looks for iscsi_boot* (bnc#876104)

2014-04-24:	4.2.20
	- merge branch netx
	- apply timeout option to wicked
	- reworked filesystem type detection, added tar
	- support xz compression
	- support unpacking of tar archives
	- Signature checking of compressed driver updates now works
	  (bnc#836366).
	- fix some bugs in last patch and add logging
	- minor corrections

2014-04-22:	4.2.19
	- merge gh#openSUSE/linuxrc#7
	- Fix for bnc#843438. Add KVM detection on s390x. If running under
	  KVM on s390x, only offer a virtio network device.
	- fix compiler warning

2014-04-11:	4.2.18
	- get ibft parsing code from sle11 branch
	- try harder to resolve mac addresses to interface names (bnc#806593)
	- fix nextmedia handling (bnc#813141)
	- more fixes for nextmedia handling (bnc#813141)
	- don't load edd.ko on efi systems (bnc#837747)
	- passing ssl_verify option to yast (bnc#807799)
	- fix include
	- simplify s390x hypervisor detection code

2014-04-11:	4.2.17
	- add withipoib option to trigger loading ip over infiniband
	  modules (bnc#865852)

2014-04-08:	4.2.16
	- Don\'t prompt for DHCP if using a pont-to-point network
	  interface. (bnc#865097)
	- merge gh#openSUSE/linuxrc#6
	- Introduce detection of z/VM or LPAR hypervisors. If running on
	  z/VM always try to modprobe the netiucv kernel module
	- Add #if/#endif to last change to net.c
	- Moved the check for config.net.ptp to the correct spot in the
	  logic.
	- Added util_umount('/sys/hypervisor/s390'); to lxrc_end.

2014-03-26:	4.2.15
	- remove gobal net_is_ptp_im var and put ptp checks into a single
	  function
	- don't do arping on ptp interfaces
	- ctc0 is now slccw0.0.????
	- fix gcc aliasing warning

2014-03-20:	4.2.14
	- ensure echo is on (bnc#865956)
	- don't kill too many processes (bnc#869113)

2014-03-10:	4.2.13
	- merge gh#openSUSE/linuxrc#5
	- s390: make sure network device has been activated before driver
	  update (bnc#616341, bnc#862673)
	- add 'autoyast2' option in preparation to fate#316530

2014-03-07:	4.2.12
	- fix cifs mount arguments (bnc#865267)

2014-02-28:	4.2.11
	- calculate prefix len from netmask (bnc#865199)

2014-02-27:	4.2.10
	- fix language setting (bnc#865370)

2014-02-18:	4.2.9
	- make 'textmode' equivalent to textmod=1 (bnc#864316)
	- write complete static network config for wicked
	- update copyright string

2014-02-17:	4.2.8
	- wicked: write static ifcfg files

2014-02-17:	4.2.7
	- Fix for bnc#571990. Don't prompt for DHCP unless a Layer 2 NIC
	  has been selected.
	- Revert "Fix for bnc#571990. Don't prompt for DHCP unless a Layer
	  2 NIC has been selected." Fix wasn't complete. This reverts
	  commit 06f06163a49be544842f025df941966c823eed94.
	- make wicked (for dhcp) the default

2014-02-05:	4.2.6
	- recognnize s390 point-to-point devices this is a merge of commit
	  44607df402171569048c79df95a17e8b28aeb0ab

2014-02-03:	4.2.5
	- don't run scripts in test mode
	- add basic wicked support (dhcpv4)
	- reduce dependency on arch-specific defines

2013-12-20:	4.2.4
	- make linemode default on s390, swap linemode 1 & 2

2013-12-19:	4.2.3
	- merge gh#openSUSE/linuxrc#4
	- Initial changes to use IBM-supplied chzdev command instead of our
	  *_configure commands.
	- allow linuxrc to be restarted

2013-12-05:	4.2.2
	- rework linemode (fate#313156)

2013-12-04:	4.2.1
	- add back language menu
	- allow media checks of any device (bnc#848020)
	- add 'back' entry in linemode (fate#313155) use readline in linemode

2013-11-18:	4.2.0
	- merge branch master
	- s390: handle empty portname correctly (bnc#760042)
	- merge branch master
	- s390: handle empty portname correctly (bnc#760042)
	- if no install url given, try dvds, then hds
	- nfs: use mount(8) and mount.nfs(8) to mount nfs exports (bnc#799496)
	- add back language defines

2013-01-16:	4.1.4
	- drop /etc/nothing

2013-01-15:	4.1.3
	- support https

2013-01-14:	4.1.2
	- fix segfault reading duds (bnc#798110)

2012-12-13:	4.1.1
	- Revert "clean-up: removed built-in extend"

2012-11-26:	4.1.0
	- merge branch master
	- url: eliminate non-standard nested functions
	- slp: error handling bug (found by clang)
	- clean-up: remove mkdevs, staticdevices option
	- clean-up: removed built-in rmmod, lsmod
	- clean-up: removed built-in mount, umount
	- clean-up: removed built-in cat, hex, echo, ps, lsof
	- clean-up: removed built-in ls, rm, mv, ln
	- clean-up: removed built-in mkdir, chroot, kill, killall
	- clean-up: removed built-in swapoff, raidautorun, free, wget,
	  fstype, nothing
	- clean-up: removed built-in extend
	- clean-up: removed built-in hotplug
	- remove reference to hotplug.h from net.c
	- fix warnings about computed values not being used
	- remove lots of disabled code
	- remove i18n infrastructure and translations
	- fix console setup after plymouth
	- turn off plymouth at first opportunity
	- add plymouth config option
	- add *.conf to modprobe config files to make them work (bnc#775800)
	- make sure WORDS_BIGENDIAN is defined correctly where needed
	  (bnc#755861)

2012-06-05:	4.0.5
	- clean-up: remove token ring code and messages
	- clean-up: remove lsh (we have bash now)
	- clean-up: remove unused tftp code
	- clean-up: ditch exploding windows
	- clean-up: dump bootp
	- give tmpfs a finite size

2012-04-17:	4.0.4
	- add api to run scripts at various places
	- move prepare_rescue script
	- adjust rescue system setup

2012-04-16:	4.0.3
	- mount /dev/pts after devtmpfs (#755845)
	- create /dev/pts dir

2012-03-26:	4.0.2
	- scan whole block dev for filesystem also when there are
	  partitions (bnc#753574)
	- mount devtmpfs to /dev
	- fight compiler warnings

2012-01-25:	4.0.1
	- rename checkmd5 -> checkmedia
	- checkmedia supports sha224, sha384
	- added sha224 & sha384
	- changed license to gpl3
	- enable sha1 & sha256 as default

2012-01-24:	4.0.0
	- support md5, sha1, sha256, sha512 digests

2011-11-08:	3.5.16
	- detect fcoe disks (bnc#725134)
	- add option to start an early debug shell
	- added another debug point

2011-10-18:	3.5.15
	- fix arm build

2011-10-18:	3.5.14
	- preserve default value when chopping whitespace (bnc#706605)
	- s390: fix type mixup in LCS activation code (bnc#689374)

2011-10-18:	3.5.13
	- introduce minimal terminal size to work with strange terminals
	  (bnc#668667)
	- set ipv6 gateway (bnc#706967)
	- use 64 bit memory sizes everywhere (bnc#699886)
	- detect btrfs (bnc#713393)
	- new year

2011-09-13:	3.5.12
	- print segfault backtrace even without trace option
	- Handle symlinks in /sys/block directory.

2011-08-09:	3.5.11
	- print backtrace when we get a segfault

2011-02-24:	3.5.10
	- fix media check to work with isohybrid images (bnc#674609)

2011-02-17:	3.5.9
	- don't mess with mtab (bnc#668149)

2011-01-19:	3.5.8
	- allow for user defined options those options are ignored by
	  linuxrc but added unchanged to /etc/install.inf
	- fix user option parsing
	- add status info also to log
	- brokenmodules accepts '+' and '-' now
	- more user option fixes

2010-12-06:	3.5.7
	- don't check keyboard status too often to speed up media check

2010-12-03:	3.5.6
	- fix media check abort message (bnc#657065)

2010-10-28:	3.5.5
	- increase TTL for SLP (bnc#649854)

2010-10-20:	3.5.4
	- really accept static ipv6 addresses (bnc#633519)

2010-09-28:	3.5.3
	- remove 'no DUD found' message (bnc#601770)

2010-09-10:	3.5.2
	- fix scanning for driver updates

2010-09-02:	3.5.1
	- fix perl warning
	- fix bug introduced with 3.5.0

2010-08-24:	3.5.0
	- implemented 'disk' scheme to mean 'all local devices' as
	  documented (bnc#596458)
	- added 'quiet' option to url syntax

2010-08-20:	3.4.15
	- extra menu can be reached from input line via 'ESC ESC' or 'ESC x'
	- added all=1 tag to url to keep searching on all devices
	  (bnc#596456)

2010-06-25:	3.4.14
	- updated translations

2010-04-28:	3.4.13
	- always set dhcp timeout (bnc#594606)
	- make backtrace logs optional (bnc#597797)
	- dud option accepts normal rpms

2010-03-30:	3.4.12
	- add 'type' option to url syntax (bnc#590811)

2010-02-26:	3.4.11
	- fix make deps for changelog
	- fix make deps for VERSION
	- added 'namescheme' option to linuxrc to select alternative device
	  name schemes (by-id, by-path, by-label); default is 'by-id'
	  (bnc#582717)

2010-02-24:	3.4.10
	- fix Makefile

2010-02-24:	3.4.9
	- create VERSION and changelog from git repo
	- added .gitignore
	- added git2log
	- add 'devices' param for zypp (bnc#570541)

2010-02-22:	3.4.8
	- don't pass uninitialized pointers to strprintf() (bnc#494301)
	- use ctc_configure for LCS devices (bnc#550232)
	- added sle11 patches (v3.3.46 - v3.3.53, inclusive): *
	  translations updated * keep /lib/firmware from initrd in rescue
	  system (bnc#576072) * s390: don't use net_config() in auto mode
	  to avoid fallback to manual (bnc#474457) * s390: set defaults for
	  CCW write and data channels * s390: allow installation via
	  console (bnc#476373) * s390: detect PTP devices in autoinstall
	  case (bnc#555236) * s390: work around bugged Operating System
	  Messages console that sends empty lines as " \r" instead of "\r"
	  (forward-ported from SLES10 SP3, bnc#517763, bnc#484358) * s390:
	  fix check for existing network config (bnc#562101) * added
	  util_error_trace() to facilitate debugging * do backtraces when
	  net_activate4() fails * s390: re-enable layer 2 for HSI
	  (bnc#559174)

2009-10-06:	3.4.7
	- pass keyboard mapping to yast (bnc#534856)

2009-09-24:	3.4.6
	- ensure 'extend' returns correct error code (bnc#510999)

2009-09-09:	3.4.5
	- no blocking popup for DHCP error message (bnc#534078)
	- starting new network setup code
	- merge branch master
	- s390: activate network interface before loading info file

2009-07-29:	3.4.4
	- handle zypp iso url scheme (bnc#507474)

2009-06-25:	3.4.3
	- removed last trace of real-root-dev (bnc#192405)
	- pass on DHCPTimeout to install.inf (bnc#396824)

2009-06-19:	3.4.2
	- added udev.rule option to write udev rules (fate#305867)

2009-06-09:	3.4.1
	- added 'netsetup=now' to force immediate network configuration
	- ext4dev -> ext4

