------------------------------------------------------------------- Mon Apr 11 20:44:34 UTC 2022 - Jan Engelhardt - Drop buildrequire on C++ compiler. - Modernize specfile constructs. ------------------------------------------------------------------- Sat Mar 26 11:14:19 UTC 2022 - Stephan Kulow - Fix buildrequire for openldap2-devel - audit doesn't require the (outdated) C++ binding, but the C headers that happen to be pulled in by buildrequiring the C++ devel package ------------------------------------------------------------------- Fri Mar 25 04:56:19 UTC 2022 - Enzo Matsumiya - Fix unhandled ECONNREFUSED with LDAP environments (bsc#1196645) * add libaudit-fix-unhandled-ECONNREFUSED-from-getpwnam-25.patch - Fix hang in audisp-remote with disk_low_action=suspend (bsc#1196517) * add audisp-remote-fix-hang-with-disk_low_action-suspend-.patch ------------------------------------------------------------------- Wed Mar 23 16:37:06 UTC 2022 - Dirk Müller - add audit-userspace-517-compat.patch ------------------------------------------------------------------- Mon Nov 29 13:13:56 UTC 2021 - Fabian Vogt - Use %autosetup - Don't include sample rules as %doc, they're already installed as normal files - Fix create-augenrules-service.patch: * auditd.service needs to require augenrules.service, not the other way around - Fix documentation for enable-stop-rules.patch ------------------------------------------------------------------- Sun Nov 7 13:34:20 UTC 2021 - Callum Farmer - Update to version 3.0.6: * fixes a segfault on some SELINUX_ERR records * makes IPX packet interpretation dependent on the ipx header file existing * adds b32/b64 support to ausyscall * adds support for armv8l * fixes auditctl list of syscalls on PPC * auditd.service now restarts auditd under some conditions ------------------------------------------------------------------- Fri Oct 15 11:13:26 UTC 2021 - Callum Farmer - Add CONFIG parameter to %sysusers_generate_pre ------------------------------------------------------------------- Wed Oct 13 19:12:06 UTC 2021 - Enzo Matsumiya - Create separate service for augenrules (bsc#1191614, bsc#1181400) * add create-augenrules-service.patch Remove ReadWritePaths=/etc/audit from auditd.service, also removes augenrules call from ExecStartPost. Create augenrules.service with the ReadWritePaths directive above. This makes /etc/audit only accessible by augenrules.service and let auditd.service (and daemon) to be sandboxed again. - Update audit-secondary.spec to accomodate the new service file. ------------------------------------------------------------------- Mon Sep 20 02:06:44 UTC 2021 - Enzo Matsumiya - Fix hardened auditd.service (bsc#1181400) * add fix-hardened-service.patch Make /etc/audit read-write from the service. Remove PrivateDevices=true to expose /dev/* to auditd.service. - Enable stop rules for audit.service (cf. bsc#1190227) * add enable-stop-rules.patch ------------------------------------------------------------------- Thu Sep 16 03:46:19 UTC 2021 - Enzo Matsumiya - Change default log_format from ENRICHED to RAW (bsc#1190500): * add change-default-log_format.patch (SUSE-specific patch) - Update to version 3.0.5: * In auditd, flush uid/gid caches when user/group added/deleted/modified * Fixed various issues when dealing with corrupted logs * In auditd, check if log_file is valid before closing handle - Include fixed from 3.0.4: * Apply performance speedups to auparse library * Optimize rule loading in auditctl * Fix an auparse memory leak caused by glibc-2.33 by replacing realpath * Update syscall table to the 5.14 kernel * Fixed various issues when dealing with corrupted logs ------------------------------------------------------------------- Mon Aug 16 13:29:21 UTC 2021 - Marcus Meissner - harden_auditd.service.patch: automatic hardening applied to systemd services ------------------------------------------------------------------- Fri Jul 30 18:14:14 CEST 2021 - Enzo Matsumiya - Update to version 3.0.3: * Dont interpret audit netlink groups unless AUDIT_NLGRP_MAX is defined * Add support for AUDIT_RESP_ORIGIN_UNBLOCK_TIMED to ids * Change auparse_feed_has_data in auparse to include incomplete events * Auditd, stop linking against -lrt * Add ProtectHome and RestrictRealtime to auditd.service * In auditd, read up to 3 netlink packets in a row * In auditd, do not validate path to plugin unless active * In auparse, only emit config errors when AUPARSE_DEBUG env variable exists - use https source urls ------------------------------------------------------------------- Mon Jun 14 20:54:49 CEST 2021 - Enzo Matsumiya - Adjust audit.spec and audit-secondary.spec to support new version - Include fix for libev * add libev-werror.patch - Update to version 3.0.2 - In audispd-statsd pluging, use struct sockaddr_storage (Ville Heikkinen) - Optionally interpret auid in auditctl -l - Update some syscall argument interpretations - In auditd, do not allow spaces in the hostname name format - Big documentation cleanup (MIZUTA Takeshi) - Update syscall table to the 5.12 kernel - Update the auparse normalizer for new event types - Fix compiler warnings in ids subsystem - Block a couple signals from flush & reconfigure threads - In auditd, don't wait on flush thread when exiting - Output error message if the path of input files are too long ausearch/report Included fixes from 3.0.1 - Update syscall table to the 5.11 kernel - Add new --eoe-timeout option to ausearch and aureport (Burn Alting) - Only enable periodic timers when listening on the network - Upgrade libev to 4.33 - Add auparse_new_buffer function to auparse library - Use the select libev backend unless aggregating events - Add sudoers to some base audit rules - Update the auparse normalizer for some new syscalls and event types Included fixes from 3.0 - Generate checkpoint file even when no results are returned (Burn Alting) - Fix log file creation when file logging is disabled entirely (Vlad Glagolev) - Convert auparse_test to run with python3 (Tomáš Chvátal) - Drop support for prelude - Adjust backlog_wait_time in rules to the kernel default (#1482848) - Remove ids key syntax checking of rules in auditctl - Use SIGCONT to dump auditd internal state (#1504251) - Fix parsing of virtual timestamp fields in ausearch_expression (#1515903) - Fix parsing of uid & success for ausearch - Add support for not equal operator in audit by executable (Ondrej Mosnacek) - Hide lru symbols in auparse - Add systemd process protections - Fix aureport summary time range reporting - Allow unlimited retries on startup for remote logging - Add queue_depth to remote logging stats and increase default queue_depth size - Fix segfault on shutdown - Merge auditd and audispd code - Close on execute init_pipe fd (#1587995) - Breakout audisp syslog plugin to be standalone program - Create a common internal library to reduce code - Move all audispd config files under /etc/audit/ - Move audispd.conf settings into auditd.conf - Add queue depth statistics to internal state dump report - Add network statistics to internal state dump report - SIGUSR now also restarts queue processing if its suspended - Update lookup tables for the 4.18 kernel - Add auparse_normalizer support for SOFTWARE_UPDATE event - Add 30-ospp-v42.rules to meet new Common Criteria requirements - Deprecate enable_krb and replace with transport config opt for remote logging - Mark netlabel events as simple events so that get processed quicker - When auditd is reconfiguring, only SIGHUP plugins with valid pid (#1614833) - In aureport, fix segfault in file report - Add auparse_normalizer support for labeled networking events - Fix memory leak in audisp-remote plugin when using krb5 transport. (#1622194) - In ausearch/auparse, event aging is off by a second - In ausearch/auparse, correct event ordering to process oldest first - Migrate auparse python test to python3 - auparse_reset was not clearing everything it should - Add support for AUDIT_MAC_CALIPSO_ADD, AUDIT_MAC_CALIPSO_DEL events - In ausearch/report, lightly parse selinux portion of USER_AVC events - Add bpf syscall command argument interpretation to auparse - In ausearch/report, limit record size when malformed - Port af_unix plugin to libev - In auditd, fix extract_type function for network originating events - In auditd, calculate right size and location for network originating events - Make legacy script wait for auditd to terminate (#1643567) - Treat all network originating events as VER2 so dispatcher doesn't format it - If an event has a node name make it VER2 so dispatcher doesnt format it - In audisp-remote do an initial connection attempt (#1625156) - In auditd, allow expression of space left as a percentage (#1650670) - On PPC64LE systems, only allow 64 bit rules (#1462178) - Make some parts of auditd state report optional based on config - Update to libev-4.25 - Fix ausearch when checkpointing a single file (Burn Alting) - Fix scripting in 31-privileged.rules wrt filecap (#1662516) - In ausearch, do not checkpt if stdin is input source - In libev, remove __cold__ attribute for functions to allow proper hardening - Add tests to configure.ac for openldap support - Make systemd support files use /run rather than /var/run (Christian Hesse) - Fix minor memory leak in auditd kerberos credentials code - Allow exclude and user filter by executable name (Ondrej Mosnacek) - Fix auditd regression where keep_logs is limited by rotate_logs 2 file test - In ausearch/report fix --end to use midnight time instead of now (#1671338) - Add substitue functions for strndupa & rawmemchr - Fix memleak in auparse caused by corrected event ordering - Fix legacy reload script to reload audit rules when daemon is reloaded - Support for unescaping in trusted messages (Dmitry Voronin) - In auditd, use standard template for DEAMON events (Richard Guy Briggs) - In aureport, fix segfault for malformed USER_CMD events - Add exe field to audit_log_user_command in libaudit - In auditctl support filter on socket address families (Richard Guy Briggs) - Deprecate support for Alpha & IA64 processors - If space_left_action is rotate, allow it every time (#1718444) - In auparse, drop standalone EOE events - Add milliseconds column for ausearch extra time csv format - Fix aureport first event reporting when no start given - In audisp-remote, add new config item for startup connection errors - Remove dependency on chkconfig - Install rules to /usr/share/audit/sample-rules/ - Split up ospp rules to make SCAP scanning easier (#1746018) - In audisp-syslog, support interpreting records (#1497279) - Audit USER events now sends msg as name value pair - Add support for AUDIT_BPF event - Auditd should not process AUDIT_REPLACE events - Update syscall tables to the 5.5 kernel - Improve personality interpretation by using PERS_MASK - Speedup ausearch/report parsing RAW logging format by caching uid/name lookup - Change auparse python bindings to shared object (Issue #121) - Add error messages for watch permissions - If audit rules file doesn't exist log error message instead of info message - Revise error message for unmatched options in auditctl - In audisp-remote, fixup remote endpoint disappearin in ascii format - Add backlog_wait_time_actual reporting / resetting to auditctl (Max Englander) - In auditctl, add support for sending a signal to auditd - Removes audit-fno-common.patch: fixed in upstream - Removes audit-python3.patch: fixed in upstream ------------------------------------------------------------------- Mon Feb 1 18:13:18 UTC 2021 - Dominique Leuenberger - Do not explicitly provide group(audit) in system-users-audit: this is automatically handled by rpm/providers. ------------------------------------------------------------------- Thu Jan 28 17:59:43 UTC 2021 - Enzo Matsumiya - Create new "audit" group for read access to logs (bsc#1178154) * add change-default-log_group.patch * update audit-secondary.spec ------------------------------------------------------------------- Wed Dec 2 11:49:28 UTC 2020 - Alexander Bergmann - Enable Aarch64 processor support. (bsc#1179515 bsc#1179806) ------------------------------------------------------------------- Fri Oct 16 09:40:34 UTC 2020 - Ludwig Nussel - prepare usrmerge (boo#1029961) ------------------------------------------------------------------- Mon Jan 13 17:39:03 UTC 2020 - Tony Jones - Update to version 2.8.5: * Fix segfault on shutdown * Fix hang on startup (#1587995) * Add sleep to script to dump state so file is ready when needed * Add auparse_normalizer support for SOFTWARE_UPDATE event * Mark netlabel events as simple events so that get processed quicker * When audispd is reconfiguring, only SIGHUP plugins with valid pid (#1614833) * Add 30-ospp-v42.rules to meet new Common Criteria requirements * Update lookup tables for the 4.18 kernel * In aureport, fix segfault in file report * Add auparse_normalizer support for labeled networking events * Fix memory leak in audisp-remote plugin when using krb5 transport. (#1622194) * Event aging is off by a second * In ausearch/auparse, correct event ordering to process oldest first * auparse_reset was not clearing everything it should * Add support for AUDIT_MAC_CALIPSO_ADD, AUDIT_MAC_CALIPSO_DEL events * In ausearch/report, lightly parse selinux portion of USER_AVC events * In ausearch/report, limit record size when malformed * In auditd, fix extract_type function for network originating events * In auditd, calculate right size and location for network originating events * Treat all network originating events as VER2 so dispatcher doesn't format it * In audisp-remote do an initial connection attempt (#1625156) * In auditd, allow expression of space left as a percentage (#1650670) * On PPC64LE systems, only allow 64 bit rules (#1462178) * Make some parts of auditd state report optional based on config * Fix ausearch when checkpointing a single file (Burn Alting) * Fix scripting in 31-privileged.rules wrt filecap (#1662516) * In ausearch, do not checkpt if stdin is input source * In libev, remove __cold__ attribute for functions to allow proper hardening * Add tests to configure.ac for openldap support * Make systemd support files use /run rather than /var/run (Christian Hesse) * Fix minor memory leak in auditd kerberos credentials code * Fix auditd regression where keep_logs is limited by rotate_logs 2 file test * In ausearch/report fix --end to use midnight time instead of now (#1671338) - Fix build errors when using gcc-10 no-common default (bsc#1160384) New patch: audit-fno-common.patch - Refresh audit-allow-manual-stop.patch ------------------------------------------------------------------- Thu Mar 21 10:32:43 UTC 2019 - Jan Engelhardt - Reduce scriptlets' hard dependency on systemd. ------------------------------------------------------------------- Sat Jun 23 08:16:07 UTC 2018 - antoine.belvire@opensuse.org - Update to version 2.8.4: * Generate checkpoint file even when not results are returned (Burn Alting). * Fix log file creation when file logging is disabled entirely (Vlad Glagolev). * Use SIGCONT to dump auditd internal state (rh#1504251). * Fix parsing of virtual timestamp fields in ausearch_expression (rh#1515903). * Fix parsing of uid & success for ausearch. * Hide lru symbols in auparse. * Fix aureport summary time range reporting. * Allow unlimited retries on startup for remote logging. * Add queue_depth to remote logging stats and increase default queue_depth size. ------------------------------------------------------------------- Sun Jun 17 10:48:40 UTC 2018 - antoine.belvire@opensuse.org - Update to version 2.8.3: * Correct msg function name in lru debug code. * Fix a segfault in auditd when dns resolution isn't available. * Make a reload legacy service for auditd. * In auparse python bindings, expose some new types that were missing. * In normalizer, pickup subject kind for user_login events. * Fix interpretation of unknown ioctcmds (rh#1540507). * Add ANOM_LOGIN_SERVICE, RESP_ORIGIN_BLOCK, & RESP_ORIGIN_BLOCK_TIMED events. * In auparse_normalize for USER_LOGIN events, map acct for subj_kind. * Fix logging of IPv6 addresses in DAEMON_ACCEPT events (rh#1534748). * Do not rotate auditd logs when num_logs < 2 (brozs). ------------------------------------------------------------------- Tue Apr 3 13:33:34 CEST 2018 - kukuk@suse.de - Use %license instead of %doc [bsc#1082318] ------------------------------------------------------------------- Fri Mar 16 19:44:45 UTC 2018 - tonyj@suse.com - Change openldap dependency to client only (bsc#1085003) - Resolve issue with previous change if both Python2 and Python3 are present, tests were failing as python2 bindings are preferred in this case. ------------------------------------------------------------------- Thu Feb 22 11:00:16 UTC 2018 - meissner@suse.com - reverted -j1 force ppc specific only ------------------------------------------------------------------- Wed Feb 7 09:26:35 UTC 2018 - tchvatal@suse.com - Add patch to fix test run without python2 interpreter: * audit-python3.patch - Update to 2.8.2 release: * Update tables for 4.14 kernel * Fixup ipv6 server side binding * AVC report from aureport was missing result column header (#1511606) * Add SOFTWARE_UPDATE event * In ausearch/report pickup any path and new-disk fields as a file * Fix value returned by auditctl --reset-lost (Richard Guy Briggs) * In auparse, fix expr_create_timestamp_comparison_ex to be numeric field * Fix building on old systems without linux/fanotify.h * Fix shell portability issues reported by shellcheck * Auditd validate_email should not use gethostbyname ------------------------------------------------------------------- Tue Feb 6 13:24:43 UTC 2018 - normand@linux.vnet.ibm.com - force -j1 for PowerPC make check to avoid build failure (lookup_test.o: file not recognized: File truncated) ------------------------------------------------------------------- Wed Jan 17 15:25:55 UTC 2018 - tchvatal@suse.com - Add conditions around python plugins to allow us to conditionalize them in enviroment without python2 ------------------------------------------------------------------- Thu Nov 9 16:21:23 UTC 2017 - mpluskal@suse.com - Rename python binding packages to match current python packaging standards - Update python build dependencies to resolve future split of python2/3 ------------------------------------------------------------------- Sat Nov 4 21:11:35 UTC 2017 - aavindraa@gmail.com - Update to version 2.8.1. See audit.spec (libaudit1) for upstream changelog - Remove audit-implicit-writev.patch (fixed upstream across 2 commits) * 3b30db20ad983274989ce9a522120c3c225436b3 * 07132c22314e9abbe64d1031fd8734243285bb3f - Cleanup with spec-cleaner ------------------------------------------------------------------- Fri Aug 18 08:50:02 UTC 2017 - dimstar@opensuse.org - Add audit-implicit-writev.patch: include sys/uio.h to ensure readv and writev are declared. ------------------------------------------------------------------- Mon Jul 24 13:59:06 UTC 2017 - jengelh@inai.de - Rectify RPM groups, diversify descriptions. - Remove mentions of static libraries because they are not built. ------------------------------------------------------------------- Tue Jul 18 18:33:40 UTC 2017 - tonyj@suse.com - Update to version 2.7.7. See audit.spec (libaudit1) for upstream changelog Since commit 6cf57d27 (2.7.4) audit is now started as an non-forking service (bsc#1042781). Add config: audit-stop.rules Refresh patch: audit-allow-manual-stop.patch Refresh patch: audit-no-gss.patch ------------------------------------------------------------------- Fri Apr 1 14:59:05 UTC 2016 - tchvatal@suse.com - Version update to 2.5. See audit.spec (libaudit1) for upstream changelog - Cleanup with spec-cleaner - Sort out bit /sbin /usr/sbin/ installation - Install the rules as documentation - Remove needless %py_requires from python subpkgs ------------------------------------------------------------------- Fri Aug 21 19:00:36 UTC 2015 - tonyj@suse.com - Update to version 2.4.4. See audit.spec (libaudit1) for upstream changelog - Add python3 bindings for libaudit and libauparse - Remove patch 'audit-no_m4_dir.patch' (added Fri Apr 26 11:14:39 UTC 2013 by mmeister@suse.com) No idea what earlier 'automake' build error this was trying to fix but it broke the handling of "--without-libcap-ng". Anyways, no build error occurs now and m4 path is also needed in v2.4.4 to find ax_prog_cc_for_build ------------------------------------------------------------------- Tue Sep 2 17:35:12 UTC 2014 - tonyj@suse.com - Update to version 2.4. See audit.spec (libaudit1) for upstream changelog Drop patch: auditd-donot-start-if-kernel-cmdline-disabled.patch ------------------------------------------------------------------- Fri Aug 15 14:24:33 UTC 2014 - crrodriguez@opensuse.org - If the system has been booted with audit=0 in the kernel cmdline auditd.service must refrain from starting as the relevant kernel subsystem will be permanently disabled. add patch: auditd-donot-start-if-kernel-cmdline-disabled.patch ------------------------------------------------------------------- Thu Jul 10 06:21:55 UTC 2014 - tonyj@suse.com - Do not require tclass field to be present when searching for AVC records (bnc#878687) add patch: audit-ausearch-do-not-require-tclass.patch ------------------------------------------------------------------- Tue Apr 15 00:52:16 UTC 2014 - tonyj@suse.com - Update to version 2.3.6. See audit.spec (libaudit1) for upstream changelog ------------------------------------------------------------------- Wed Mar 26 18:41:33 UTC 2014 - crrodriguez@opensuse.org - fix systemd warning: "Configuration file /usr/lib/systemd/system/auditd.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions" * indeed restricting access to unit files using filesystem permissions is non-sense. ------------------------------------------------------------------- Thu Feb 27 16:28:31 UTC 2014 - tonyj@suse.com - Add systemd requires (bnc#865849) ------------------------------------------------------------------- Tue Feb 4 00:06:30 UTC 2014 - tonyj@suse.com - Update to version 2.3.3. See audit.spec (libaudit1) for upstream changelog ------------------------------------------------------------------- Tue Nov 26 18:28:58 UTC 2013 - tonyj@suse.com - Update to version 2.3.2. See audit.spec (libaudit1) for upstream changelog - Drop patch 'audit-fix-implicit-defn.patch' (upstream) - Add patch 'audit-allow-manual-stop.patch' to reinstate service stop/restart. - /etc/sysconfig/audit still existed but was no longer referenced by systemd, so remove - Delete audit-no_plugins.patch, it was stale (no longer referenced by specfiles) but had not been removed. ------------------------------------------------------------------- Wed Oct 2 12:48:50 UTC 2013 - opensuse@cboltz.de - (re-)add rcauditd as symlink to /usr/sbin/service ------------------------------------------------------------------- Thu Jun 27 15:17:16 UTC 2013 - tonyj@suse.com - Eliminate build cycles. audit.spec now builds only libs/devel. Remainder (including daemon) built from audit-secondary.spec - Add patch 'audit-fix-implicit-defn.patch' to fix implicit definition warning. ------------------------------------------------------------------- Mon Mar 25 17:27:47 UTC 2013 - crrodriguez@opensuse.org - Buildrequires cap-ng library ------------------------------------------------------------------- Tue Jan 22 12:34:00 UTC 2013 - jengelh@inai.de - Executing autoreconf requires autoconf ------------------------------------------------------------------- Fri Oct 12 13:00:30 UTC 2012 - coolo@suse.com - Update to version 2.2.1, see audit's changes ------------------------------------------------------------------- Tue Feb 28 21:58:24 UTC 2012 - tonyj@suse.com - Update to version 2.1.3. See audit.spec upstream changelog ------------------------------------------------------------------- Sat Sep 17 13:38:42 UTC 2011 - jengelh@medozas.de - Remove redundant tags/sections from specfile ------------------------------------------------------------------- Fri May 20 16:54:38 UTC 2011 - tonyj@novell.com - Adjust license of audit-libs-python to be LGPLv2.1 or later. ------------------------------------------------------------------- Wed Apr 27 00:05:50 UTC 2011 - tonyj@novell.com - Upgrade to version 2.1.1 (see audit.changes for upstream change history) ------------------------------------------------------------------- Wed Sep 29 00:22:38 UTC 2010 - tonyj@novell.com - Upgrade to version 2.0.5 (see audit.changes for upstream change history) ------------------------------------------------------------------- Mon Jun 28 06:38:35 UTC 2010 - jengelh@medozas.de - use %_smp_mflags ------------------------------------------------------------------- Tue May 4 10:51:33 CEST 2010 - tonyj@suse.de - Upgrade to version 2.0.4 (see audit.changes for upstream change history) ------------------------------------------------------------------- Sat Jun 20 12:33:00 CEST 2009 - cmorve69@yahoo.es - fixed build with --as-needed ------------------------------------------------------------------- Mon May 11 17:19:50 CEST 2009 - tonyj@suse.de - Update from 1.7.7 to 1.7.13 (see audit.changes for upstream change history) ------------------------------------------------------------------- Fri Sep 26 23:27:36 CEST 2008 - tonyj@suse.de - Update from 1.7.4 to 1.7.7 (see audit.changes for upstream change history) ------------------------------------------------------------------- Fri Aug 1 17:12:46 CEST 2008 - ro@suse.de - disable debuginfo for secondary specfile ------------------------------------------------------------------- Wed Jun 25 01:50:54 CEST 2008 - tonyj@suse.de - Update from 1.7.2 to 1.7.4 (see audit.changes for upstream change history) - Update from 1.6.8 to 1.7.2 (see audit.changes for upstream change history) ------------------------------------------------------------------- Tue Jun 3 21:49:41 CEST 2008 - coolo@suse.de - avoid packaging a directory with different permissions (creating rpm -V output) ------------------------------------------------------------------- Wed Apr 16 12:09:26 CEST 2008 - aj@suse.de - Use %py_requires for proper requires. ------------------------------------------------------------------- Wed Mar 26 21:29:38 CET 2008 - tonyj@suse.de - Update to version 1.6.8. - Rename to audit-secondary and build audisp-plugins from here to minimise bootstrap dependancies. ------------------------------------------------------------------- Tue Mar 18 14:43:11 CET 2008 - schwab@suse.de - Use autoreconf. ------------------------------------------------------------------- Wed Oct 10 23:19:29 CEST 2007 - tonyj@suse.de - Upgrade to 1.6.2 ------------------------------------------------------------------- Wed Jul 25 01:13:09 CEST 2007 - tonyj@suse.de - Upgrade to 1.5.5 Drop audit-swig-attribute.patch (upstreamed) ------------------------------------------------------------------- Fri Jul 13 01:58:29 CEST 2007 - tonyj@suse.de - Fix build errors on ppc ------------------------------------------------------------------- Thu Jul 12 01:38:36 CEST 2007 - tonyj@suse.de - Upgrade to 1.5.4 ------------------------------------------------------------------- Wed May 2 19:08:53 CEST 2007 - tonyj@suse.de - Upgrade to 1.5.3. ------------------------------------------------------------------- Wed Nov 29 02:47:22 CET 2006 - tonyj@suse.de - Upgrade to 1.2.9 (drop several patches which are now upstream) - /usr/sbin/audispd now packaged by audit-libs-python ------------------------------------------------------------------- Sun Nov 5 00:45:21 CET 2006 - ro@suse.de - fix requires ------------------------------------------------------------------- Thu Aug 31 22:57:52 CEST 2006 - tonyj@suse.de - Upgrade to 1.2.6-1 ------------------------------------------------------------------- Wed Aug 16 16:19:20 CEST 2006 - cthiel@suse.de - split off package