From: jbeulich@novell.com
Subject: Disallow all accesses to the local APIC page
Patch-mainline: n/a
References: bnc#191115

--- sle11sp3.orig/arch/x86/include/asm/apic.h	2011-11-04 14:58:49.000000000 +0100
+++ sle11sp3/arch/x86/include/asm/apic.h	2011-11-04 15:04:52.000000000 +0100
@@ -9,7 +9,9 @@
 #include <asm/processor.h>
 #include <asm/apicdef.h>
 #include <asm/atomic.h>
+#ifndef CONFIG_XEN
 #include <asm/fixmap.h>
+#endif
 #include <asm/mpspec.h>
 #include <asm/system.h>
 #include <asm/msr.h>
@@ -48,6 +50,7 @@ static inline void generic_apic_probe(vo
 #ifdef CONFIG_X86_LOCAL_APIC
 
 extern unsigned int apic_verbosity;
+#ifndef CONFIG_XEN
 extern int local_apic_timer_c2_ok;
 
 extern int disable_apic;
@@ -120,6 +123,8 @@ extern u64 native_apic_icr_read(void);
 
 extern int x2apic_mode;
 
+#endif /* CONFIG_XEN */
+
 #ifdef CONFIG_X86_X2APIC
 /*
  * Make previous memory operations globally visible before
@@ -286,15 +291,18 @@ static inline void disable_local_APIC(vo
 struct apic {
 	char *name;
 
+#ifndef CONFIG_XEN
 	int (*probe)(void);
 	int (*acpi_madt_oem_check)(char *oem_id, char *oem_table_id);
 	int (*apic_id_registered)(void);
+#endif
 
 	u32 irq_delivery_mode;
 	u32 irq_dest_mode;
 
 	const struct cpumask *(*target_cpus)(void);
 
+#ifndef CONFIG_XEN
 	int disable_esr;
 
 	int dest_logical;
@@ -313,8 +321,10 @@ struct apic {
 	void (*setup_portio_remap)(void);
 	int (*check_phys_apicid_present)(int phys_apicid);
 	void (*enable_apic_mode)(void);
+#endif
 	int (*phys_pkg_id)(int cpuid_apic, int index_msb);
 
+#ifndef CONFIG_XEN
 	/*
 	 * When one of the next two hooks returns 1 the apic
 	 * is switched to this. Essentially they are additional
@@ -329,6 +339,7 @@ struct apic {
 	unsigned int (*cpu_mask_to_apicid)(const struct cpumask *cpumask);
 	unsigned int (*cpu_mask_to_apicid_and)(const struct cpumask *cpumask,
 					       const struct cpumask *andmask);
+#endif
 
 	/* ipi */
 	void (*send_IPI_mask)(const struct cpumask *mask, int vector);
@@ -338,6 +349,7 @@ struct apic {
 	void (*send_IPI_all)(int vector);
 	void (*send_IPI_self)(int vector);
 
+#ifndef CONFIG_XEN
 	/* wakeup_secondary_cpu */
 	int (*wakeup_secondary_cpu)(int apicid, unsigned long start_eip);
 
@@ -377,6 +389,7 @@ struct apic {
 	 */
 	int (*x86_32_numa_cpu_node)(int cpu);
 #endif
+#endif /* CONFIG_XEN */
 };
 
 /*
@@ -386,6 +399,8 @@ struct apic {
  */
 extern struct apic *apic;
 
+#ifndef CONFIG_XEN
+
 /*
  * APIC drivers are probed based on how they are listed in the .apicdrivers
  * section. So the order is important and enforced by the ordering
@@ -503,6 +518,7 @@ static inline void default_wait_for_init
 
 extern void generic_bigsmp_probe(void);
 
+#endif /* CONFIG_XEN */
 
 #ifdef CONFIG_X86_LOCAL_APIC
 
@@ -519,6 +535,8 @@ static inline const struct cpumask *defa
 #endif
 }
 
+#ifndef CONFIG_XEN
+
 DECLARE_EARLY_PER_CPU(u16, x86_bios_cpu_apicid);
 
 
@@ -625,6 +643,8 @@ extern int default_cpu_present_to_apicid
 extern int default_check_phys_apicid_present(int phys_apicid);
 #endif
 
+#endif /* CONFIG_XEN */
+
 #endif /* CONFIG_X86_LOCAL_APIC */
 
 #endif /* _ASM_X86_APIC_H */
--- sle11sp3.orig/arch/x86/include/asm/apicdef.h	2013-06-07 10:12:50.000000000 +0200
+++ sle11sp3/arch/x86/include/asm/apicdef.h	2013-02-05 17:03:50.000000000 +0100
@@ -17,6 +17,8 @@
  */
 #define IO_APIC_SLOT_SIZE		1024
 
+#ifndef CONFIG_XEN
+
 #define	APIC_ID		0x20
 
 #define	APIC_LVR	0x30
@@ -146,6 +148,16 @@
 #define APIC_BASE_MSR	0x800
 #define X2APIC_ENABLE	(1UL << 10)
 
+#else /* CONFIG_XEN */
+
+enum {
+	APIC_DEST_ALLBUT = 0x1,
+	APIC_DEST_SELF,
+	APIC_DEST_ALLINC
+};
+
+#endif /* CONFIG_XEN */
+
 #ifdef CONFIG_X86_32
 # define MAX_IO_APICS 64
 # define MAX_LOCAL_APIC 256
@@ -154,6 +166,8 @@
 # define MAX_LOCAL_APIC 32768
 #endif
 
+#ifndef CONFIG_XEN
+
 /*
  * All x86-64 systems are xAPIC compatible.
  * In the following, "apicid" is a physical APIC ID.
@@ -424,6 +438,8 @@ struct local_apic {
 
 #undef u32
 
+#endif /* CONFIG_XEN */
+
 #ifdef CONFIG_X86_32
  #define BAD_APICID 0xFFu
 #else
--- sle11sp3.orig/arch/x86/include/mach-xen/asm/fixmap.h	2011-02-01 15:41:35.000000000 +0100
+++ sle11sp3/arch/x86/include/mach-xen/asm/fixmap.h	2011-02-03 14:34:58.000000000 +0100
@@ -17,7 +17,6 @@
 #ifndef __ASSEMBLY__
 #include <linux/kernel.h>
 #include <asm/acpi.h>
-#include <asm/apicdef.h>
 #include <asm/page.h>
 #ifdef CONFIG_X86_32
 #include <linux/threads.h>
@@ -85,10 +84,10 @@ enum fixed_addresses {
 #ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
 	FIX_OHCI1394_BASE,
 #endif
+#ifndef CONFIG_XEN
 #ifdef CONFIG_X86_LOCAL_APIC
 	FIX_APIC_BASE,	/* local (CPU) APIC) -- required for SMP or not */
 #endif
-#ifndef CONFIG_XEN
 #ifdef CONFIG_X86_IO_APIC
 	FIX_IO_APIC_BASE_0,
 	FIX_IO_APIC_BASE_END = FIX_IO_APIC_BASE_0 + MAX_IO_APICS - 1,
--- sle11sp3.orig/arch/x86/include/mach-xen/asm/smp.h	2011-04-13 17:01:31.000000000 +0200
+++ sle11sp3/arch/x86/include/mach-xen/asm/smp.h	2011-03-03 16:50:42.000000000 +0100
@@ -15,7 +15,7 @@
 #  include <asm/io_apic.h>
 # endif
 #endif
-#include <asm/thread_info.h>
+#include <linux/thread_info.h>
 #include <asm/cpumask.h>
 #include <asm/cpufeature.h>
 
@@ -210,7 +210,7 @@ extern unsigned disabled_cpus __cpuinitd
 
 #include <asm/smp-processor-id.h>
 
-#ifdef CONFIG_X86_LOCAL_APIC
+#if defined(CONFIG_X86_LOCAL_APIC) && !defined(CONFIG_XEN)
 
 #ifndef CONFIG_X86_64
 static inline int logical_smp_processor_id(void)
--- sle11sp3.orig/arch/x86/kernel/acpi/boot.c	2011-04-13 14:08:57.000000000 +0200
+++ sle11sp3/arch/x86/kernel/acpi/boot.c	2011-03-11 11:17:06.000000000 +0100
@@ -74,14 +74,14 @@ int acpi_sci_override_gsi __initdata;
 int acpi_skip_timer_override __initdata;
 int acpi_use_timer_override __initdata;
 int acpi_fix_pin2_polarity __initdata;
-#else
-#define acpi_skip_timer_override 0
-#define acpi_fix_pin2_polarity 0
-#endif
 
 #ifdef CONFIG_X86_LOCAL_APIC
 static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE;
 #endif
+#else
+#define acpi_skip_timer_override 0
+#define acpi_fix_pin2_polarity 0
+#endif
 
 #ifndef __HAVE_ARCH_CMPXCHG
 #warning ACPI uses CMPXCHG, i486 and later hardware
@@ -187,6 +187,7 @@ static int __init acpi_parse_madt(struct
 		return -ENODEV;
 	}
 
+#ifndef CONFIG_XEN
 	if (madt->address) {
 		acpi_lapic_addr = (u64) madt->address;
 
@@ -194,7 +195,6 @@ static int __init acpi_parse_madt(struct
 		       madt->address);
 	}
 
-#ifndef CONFIG_XEN
 	default_acpi_madt_oem_check(madt->header.oem_id,
 				    madt->header.oem_table_id);
 #endif
@@ -300,6 +300,7 @@ static int __init
 acpi_parse_lapic_addr_ovr(struct acpi_subtable_header * header,
 			  const unsigned long end)
 {
+#ifndef CONFIG_XEN
 	struct acpi_madt_local_apic_override *lapic_addr_ovr = NULL;
 
 	lapic_addr_ovr = (struct acpi_madt_local_apic_override *)header;
@@ -308,6 +309,7 @@ acpi_parse_lapic_addr_ovr(struct acpi_su
 		return -EINVAL;
 
 	acpi_lapic_addr = lapic_addr_ovr->address;
+#endif
 
 	return 0;
 }
--- sle11sp3.orig/arch/x86/kernel/irq-xen.c	2013-06-07 10:50:08.000000000 +0200
+++ sle11sp3/arch/x86/kernel/irq-xen.c	2013-06-07 10:54:29.000000000 +0200
@@ -17,9 +17,9 @@
 #include <asm/mce.h>
 #include <asm/hw_irq.h>
 
+#ifndef CONFIG_XEN
 atomic_t irq_err_count;
 
-#ifndef CONFIG_XEN
 /* Function pointer for generic interrupt vector handling */
 void (*x86_platform_ipi_callback)(void) = NULL;
 #endif
@@ -60,6 +60,7 @@ int arch_show_interrupts(struct seq_file
 		seq_printf(p, "%10u ", irq_stats(j)->__nmi_count);
 	seq_printf(p, "  Non-maskable interrupts\n");
 #ifdef CONFIG_X86_LOCAL_APIC
+#ifndef CONFIG_XEN
 	seq_printf(p, "%*s: ", prec, "LOC");
 	for_each_online_cpu(j)
 		seq_printf(p, "%10u ", irq_stats(j)->apic_timer_irqs);
@@ -73,6 +74,7 @@ int arch_show_interrupts(struct seq_file
 	for_each_online_cpu(j)
 		seq_printf(p, "%10u ", irq_stats(j)->apic_perf_irqs);
 	seq_printf(p, "  Performance monitoring interrupts\n");
+#endif
 	seq_printf(p, "%*s: ", prec, "IWI");
 	for_each_online_cpu(j)
 		seq_printf(p, "%10u ", irq_stats(j)->apic_irq_work_irqs);
@@ -129,10 +131,12 @@ int arch_show_interrupts(struct seq_file
 		seq_printf(p, "%10u ", per_cpu(mce_poll_count, j));
 	seq_printf(p, "  Machine check polls\n");
 #endif
+#ifndef CONFIG_XEN
 	seq_printf(p, "%*s: %10u\n", prec, "ERR", atomic_read(&irq_err_count));
 #if defined(CONFIG_X86_IO_APIC)
 	seq_printf(p, "%*s: %10u\n", prec, "MIS", atomic_read(&irq_mis_count));
 #endif
+#endif
 	return 0;
 }
 
@@ -177,8 +181,12 @@ u64 arch_irq_stat_cpu(unsigned int cpu)
 
 u64 arch_irq_stat(void)
 {
+#ifndef CONFIG_XEN
 	u64 sum = atomic_read(&irq_err_count);
 	return sum;
+#else
+	return 0;
+#endif
 }
 
 
--- sle11sp3.orig/drivers/xen/core/smpboot.c	2012-10-19 14:40:36.000000000 +0200
+++ sle11sp3/drivers/xen/core/smpboot.c	2012-10-19 15:50:05.000000000 +0200
@@ -286,7 +286,7 @@ void __init smp_prepare_cpus(unsigned in
 	 * Here we can be sure that there is an IO-APIC in the system. Let's
 	 * go and set it up:
 	 */
-	if (!skip_ioapic_setup && nr_ioapics)
+	if (cpu_has_apic && !skip_ioapic_setup && nr_ioapics)
 		setup_IO_APIC();
 #endif
 }
