# # spec file for package u-boot-omap4panda # # Copyright (c) 2018 SUSE LINUX GmbH, Nuernberg, Germany. # Copyright (c) 2010 Texas Instruments Inc by Nishanth Menon # Copyright (c) 2007-2010 by Silvan Calarco # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed # upon. The license for this file, and modifications and additions to the # file, is the same license as for the pristine package itself (unless the # license for the pristine package is not an Open Source License, in which # case the license is the MIT License). An "Open Source License" is a # license that conforms to the Open Source Definition (Version 1.9) # published by the Open Source Initiative. # Please submit bugfixes or comments via http://bugs.opensuse.org/ # %define mvebu_spl 0 %define x_loader 1 %define rockchip_spl 0 %define sunxi_spl 0 %define arndale_spl 0 %define origen_spl 0 %define imx6_spl 0 %define socfpga_spl 0 %if "omap4panda" == "rpi" || "omap4panda" == "rpi2" || "omap4panda" == "rpi332b" || "omap4panda" == "rpi3" %define is_rpi 1 %endif # archive_version differs from version for RC version only %define archive_version 2018.03 Name: u-boot-omap4panda Version: 2018.03 Release: 0 Summary: The U-Boot firmware for the omap4panda platform License: GPL-2.0 Group: System/Boot Url: http://www.denx.de/wiki/U-Boot Source: ftp://ftp.denx.de/pub/u-boot/u-boot-%{archive_version}.tar.bz2 Source1: ftp://ftp.denx.de/pub/u-boot/u-boot-%{archive_version}.tar.bz2.sig Source2: arndale-bl1.img Source3: update_git.sh Source300: u-boot-rpmlintrc Patch0001: 0001-XXX-openSUSE-XXX-Load-dtb-from-part.patch Patch0002: 0002-Revert-Revert-omap3-Use-raw-SPL-by-.patch Patch0003: 0003-Revert-rockchip-mkimage-remove-plac.patch Patch0004: 0004-rpi-Use-firmware-provided-device-tr.patch Patch0005: 0005-rpi3-Enable-lan78xx-driver.patch Patch0006: 0006-net-Only-access-network-devices-aft.patch Patch0007: 0007-rpi-Add-identifier-for-the-new-RPi3.patch Patch0008: 0008-efi_loader-Fix-network-DP-with-DM_E.patch Patch0009: 0009-rpi-Allow-to-boot-without-serial.patch Patch0010: 0010-mmc-use-core-clock-frequency-in-bcm.patch Patch0011: 0011-Temp-workaround-for-Chromebook-snow.patch Patch0012: 0012-CVE-2019-13106-ext4-fix-out-of-boun.patch Patch0013: 0013-CVE-2019-13104-ext4-check-for-under.patch Patch0014: 0014-CVE-net-fix-unbounded-memcpy-of-UDP.patch Patch0015: 0015-CVE-nfs-fix-stack-based-buffer-over.patch Patch0016: 0016-CVE-2019-14194-CVE-2019-14198-nfs-f.patch Patch0017: 0017-CVE-2019-14195-nfs-fix-unbounded-me.patch Patch0018: 0018-CVE-2019-14196-nfs-fix-unbounded-me.patch Patch0019: 0019-CVE-2019-13103-disk-stop-infinite-r.patch Patch0020: 0020-cmd-gpt-Address-error-cases-during-.patch Patch0021: 0021-Fix-ext4-block-group-descriptor-siz.patch Patch0022: 0022-lib-uuid-Fix-unseeded-PRNG-on-RANDO.patch Patch0023: 0023-image-Check-hash-nodes-when-checkin.patch Patch0024: 0024-image-Load-the-correct-configuratio.patch BuildRoot: %{_tmppath}/%{name}-%{version}-build %if 0 BuildRequires: arm-trusted-firmware-pine64 %endif # Need newer gcc to build BuildRequires: gcc7 BuildRequires: bc # Arndale board needs DTC >= 1.4 BuildRequires: dtc >= 1.4.0 # u-boot-clearfog (tools/kwbimage.c) needs openssl to build BuildRequires: libopenssl-devel BuildRequires: python-devel BuildRequires: swig %if "%{name}" == "u-boot-qemu-ppce500" # Owns /usr/share/qemu directory BuildRequires: qemu Provides: qemu-ppc:%{_datadir}/qemu/u-boot.e500 %endif %if 0%{?is_rpi} # Owns /boot/vc directory BuildRequires: raspberrypi-firmware # For mountpoint Requires(post): util-linux %endif Provides: u-boot-loader Conflicts: otherproviders(u-boot-loader) %if %x_loader == 1 Obsoletes: x-loader-omap4panda Provides: x-loader-omap4panda %endif ExclusiveArch: armv7l armv7hl %description Das U-Boot (or just "U-Boot" for short) is Open Source Firmware for Embedded PowerPC, ARM, MIPS and x86 processors. This package contains the firmware for the omap4panda platform. %package doc Summary: Documentation for the U-Boot Firmware Group: Documentation/Other %description doc Das U-Boot (or just "U-Boot" for short) is Open Source Firmware for Embedded PowerPC, ARM, MIPS and x86 processors. This package contains documentation for U-Boot firmware. %prep %setup -q -n u-boot-%{archive_version} %patch0001 -p1 %patch0002 -p1 %patch0003 -p1 %patch0004 -p1 %patch0005 -p1 %patch0006 -p1 %patch0007 -p1 %patch0008 -p1 %patch0009 -p1 %patch0010 -p1 %patch0011 -p1 %patch0012 -p1 %patch0013 -p1 %patch0014 -p1 %patch0015 -p1 %patch0016 -p1 %patch0017 -p1 %patch0018 -p1 %patch0019 -p1 %patch0020 -p1 %patch0021 -p1 %patch0022 -p1 %patch0023 -p1 %patch0024 -p1 %build export SOURCE_DATE_EPOCH=$(date -d "$(head -n 2 %{_sourcedir}/%{name}.changes | tail -n 1 | cut -d- -f1 )" +%s) %if "%{name}" == "u-boot-pine64plus" export BL31=/boot/bl31.bin %endif make %{?_smp_mflags} CROSS_COMPILE= CC=gcc-7 HOSTCFLAGS="$RPM_OPT_FLAGS" omap4_panda_defconfig echo "Attempting to enable fdt apply command (.dtbo) support." echo "CONFIG_OF_LIBFDT_OVERLAY=y" >> .config make %{?_smp_mflags} CROSS_COMPILE= CC=gcc-7 HOSTCFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes %ifarch aarch64 %if %sunxi_spl == 1 cat spl/sunxi-spl.bin u-boot.itb > u-boot-sunxi-with-spl.bin %endif %endif %if "%{name}" == "u-boot-snow" || "%{name}" == "u-boot-spring" # Chromebook ARM (snow) and HP Chromebook 11 (spring) need a uImage format export TEXT_START=$(awk '$NF == "_start" { printf "0x"$1 }' System.map) ./tools/mkimage -A arm -O linux -T kernel -C none -a $TEXT_START -e $TEXT_START -n uboot -d u-boot-dtb.bin u-boot.img %endif %if %rockchip_spl == 1 for t in ; do ./tools/mkimage -n -d spl/u-boot-spl.bin -T $t u-boot-spl.$t done %endif %install export SOURCE_DATE_EPOCH=$(date -d "$(head -n 2 %{_sourcedir}/%{name}.changes | tail -n 1 | cut -d- -f1 )" +%s) export NO_BRP_STRIP_DEBUG=true export NO_DEBUGINFO_STRIP_DEBUG=true %define uboot_dir /boot %if 0%{?is_rpi} %define uboot_dir /boot/vc %endif %if "%{name}" == "u-boot-qemu-ppce500" %define uboot_dir %{_datadir}/qemu %endif %if "%{name}" == "u-boot-jetson-tk1" # tegra-uboot-flasher needs several intermediate files, under their original name. for f in u-boot u-boot.dtb u-boot-dtb-tegra.bin u-boot-nodtb-tegra.bin spl/u-boot-spl; do install -D -m 0644 $f %{buildroot}%{uboot_dir}/$f done %else %if "%{name}" == "u-boot-p2371-2180" # Jetson TX1 Driver Pack flash.sh needs several intermediate files, under their original name. for f in u-boot u-boot.bin u-boot.dtb u-boot-dtb.bin; do install -D -m 0644 $f %{buildroot}%{uboot_dir}/$f done %else install -D -m 0644 u-boot.img %{buildroot}%{uboot_dir}/u-boot.img %if "%{name}" == "u-boot-qemu-ppce500" mv %{buildroot}%{uboot_dir}/u-boot.img %{buildroot}%{uboot_dir}/u-boot.e500 %endif %endif %endif %if %x_loader == 1 install -D -m 0644 MLO %{buildroot}%{uboot_dir}/MLO %endif %if %origen_spl == 1 install -D -m 0644 spl/origen-spl.bin %{buildroot}%{uboot_dir}/origen-spl.bin %endif %if %arndale_spl == 1 install -D -m 0644 spl/arndale-spl.bin %{buildroot}%{uboot_dir}/arndale-spl.bin install -D -m 0644 %{SOURCE2} %{buildroot}%{uboot_dir}/arndale-bl1.img %endif %if %mvebu_spl == 1 install -D -m 0644 u-boot-spl.kwb %{buildroot}%{uboot_dir}/u-boot-spl.kwb %endif %if %rockchip_spl == 1 install -D -m 0644 spl/u-boot-spl.bin %{buildroot}%{uboot_dir}/u-boot-spl.bin for t in ; do install -D -m 0644 u-boot-spl.$t %{buildroot}%{uboot_dir}/u-boot-spl.$t done %endif %if %sunxi_spl == 1 install -D -m 0644 spl/sunxi-spl.bin %{buildroot}%{uboot_dir}/sunxi-spl.bin install -D -m 0644 u-boot-sunxi-with-spl.bin %{buildroot}%{uboot_dir}/u-boot-sunxi-with-spl.bin %endif %if %imx6_spl == 1 install -D -m 0644 SPL %{buildroot}%{uboot_dir}/imx6-spl.bin %endif %if %socfpga_spl == 1 install -D -m 0644 u-boot-with-spl.sfp %{buildroot}%{uboot_dir}/u-boot-with-spl.sfp %endif %if 0%{?is_rpi} %post # On the Raspberry Pi we chain-load u-boot.bin from bootcode.bin via config.txt. # It needs to be on the first FAT partition, wherever we mounted it. # a) Unmounted, then do nothing. # b) Mounted as /boot/vc, then they're in the right place already. # c) Mounted as /boot/efi, with /boot/vc as symlink, then nothing to be done. # d) Mounted as /boot/efi, with /boot/vc a directory, then copy files over. if mountpoint -q /boot/efi; then [[ "$(readlink -f /boot/efi)" -ef "$(readlink -f %{uboot_dir})" ]] || cp %{uboot_dir}/u-boot.img /boot/efi/ fi %endif %files %defattr(-,root,root) %{uboot_dir}/* %doc Licenses/gpl-2.0.txt README %files doc %defattr(-,root,root) # Generic documents %doc doc/README.JFFS2 doc/README.JFFS2_NAND doc/README.commands %doc doc/README.autoboot doc/README.commands doc/README.console doc/README.dns %doc doc/README.hwconfig doc/README.nand doc/README.NetConsole doc/README.serial_multi %doc doc/README.SNTP doc/README.standalone doc/README.update doc/README.usb %doc doc/README.video doc/README.VLAN doc/README.silent doc/README.POST # Copy some useful kermit scripts as well %doc tools/kermit/dot.kermrc tools/kermit/flash_param tools/kermit/send_cmd tools/kermit/send_image # Now any h/w dependent Documentation %doc doc/README.ARM-memory-map %changelog