SLES 12 QEMU/KVM RELATED SUPPORT STATEMENTS NOTE: Some content that was previously included here is now documented in the product release notes or the online product documentation to avoid duplication. Overview -------- The QEMU packages included with SLES 12 provide a large variety of features, from the very latest customer requests to features of questionable quality or value. This document was created to assist the user in deciding which features can be relied upon to build enterprise class virtualization solutions. KVM virtualization for the System z host (s390x) is provided as a technology preview while on x86 support is offered at the L3 (full support) level. KVM is implemented as linux kernel modules, which enables the linux kernel to function as an integral part of the KVM hypervisor. The hypervisor-guest interaction is controlled by QEMU through the /dev/kvm ioctl interface. The linux host assists in the virtualization of storage, networking and display resources as well as direct hardware passthrough of PCI and USB devices. Linux memory and cpu management features are used by both KVM and QEMU to enable guests to share host resources as efficiently as possible. QEMU is a primary component of KVM based virtualization. The legacy qemu-kvm program is provided for continuity with pre SLES 12 usage, including in libvirt xml references. The QEMU emulator binaries qemu-system-x86_64 and qemu-system-i386 (x86 host) and qemu-system-s390x (System z host) are now the primary programs to use to enable KVM virtualization. When using these programs, the -machine option accel=kvm (or its alias -enable-kvm) must be specified for KVM accelation to be active. Libvirt is the preferred means of accessing QEMU/KVM functionality. This document focuses on the features and direct usage of QEMU/KVM. Refer to other documentation for libvirt and libvirt based tools usage. Major QEMU/KVM Supported Features --------------------------------- - KVM virtualization is accomplished by using the QEMU program in KVM acceleration mode. KVM acceleration requires that both guest and host have the same fundamental architecture. - Guest images created under previous QEMU versions are supported through machine types which match up with these previous versions. - For ease of use, the QEMU program has defaults which represent traditional usage patterns. - Guest virtual machine characteristics are specified by a combination of internal defaults, given on the QEMU program command-line, and optional config files. Run-time control is done through either through the Human Monitor "Protocol" (HMP), or the JSON based programmatical QEMU Monitor Protocol (QMP) interface. Since a KVM guest runs in the context of a normal linux process, some types of execution controls are managed with normal linux tools. - Various standard vCPU types are available, along with the ability to specify specific CPU features visible to the guest. - QEMU incorporates a SEABIOS based system BIOS and iPXE based PXE ROMs which allow boot options common to PC's along with other features tailored to virtualization. Various VGABIOS ROMs (also from the SEABIOS project) are also included. - Some QEMU messages have been localized to various languages. This is provided by the qemu-lang package. Keyboard mappings for various nationalities is also provided. - Virtual machine lifecycle controls include startup through the system bios or using kernel boot, ACPI or legacy based shutdown, execution pausing, and the saving and restoring of machine state. Two varieties of "monitors" are provided for controlling runtime aspects of the VM: the human monitor, and a JSON based QMP (See /usr/share/doc/packages/kvm/qmp-commands.txt). - Guest execution state may be "moved" in both time (save/restore) and space (static and live migration). Guest migration from SLES 11 SP3 to SLES 12 hosts is supported. - Security considerations include secccomp2 based sandboxing, vTPM, privileged helpers and security models for executing QEMU as non-root users. - QEMU is able to run a wide range of common operating systems as guests. See the online SUSE documentation for supported OS's. Windows guests can optionally be accelerated with QEMU/KVM provided Hyper-V hypercalls, or with paravirtual drivers from the SUSE Virtual Machine Driver Pack. - QEMU provides best effort reuse of existing disk images, including those with systems installed, through geometry probing. Also disk images produced by other popular virtualization technologies may be imported into QEMU supported storage formats. These QEMU formats include features which exploit the benefits of virtualization. - Memory, cpu and disk space overcommit are possible and can be beneficial when done responsibly. Additional management of these resources comes in the form of memory ballooning, Host KSM, vcpu hot-add, online disk resizing, trim, discard and hole punching. - Guest performance is enhanced through the use of virtio devices, various disk caching modes, network acceleration via the vhost-net kernel module including zero copy optimizations, multiqueue network transmit capabilities, host transparent huge pages (THP) and direct hugetlb usage. Physical PCI and USB devices may also be passed through to the guest, including SR-IOV VF's. - The guest's UI is accessable via GTK, SDL, VNC, Spice, and serial (including curses TUI) interfaces. - Guest timekeeping is supported in a variety of ways, including a paravirtual clocksource, and options for the various guest clocks for how to handle the timeslicing of the guest's execution on the host. - Guest OS's interact with virtualized hardware including a choice of either older or more recent x86 system chipsets, system devices and buses, and a variety of common storage and networking emulated devices. SMBIOS and ACPI table details can be customized. Virtio based para-virtual devices are available for more efficient I/O. - In addition to the para-virtualized devices already mentioned, other devices and infrastructure designed to avoid virtualization "problem areas" are available such as SPICE graphics, vmmouse emulation and tablet style pointer interfaces. - A built-in user-mode network (SLIRP) stack is available. - Portions of the host file system may be shared with a guest by using virtFS. - A guest "agent" is available for SLES 12 KVM guests (see qemu-guest-agent package). This allows some introspection and control of the guest OS environment from the host. QEMU/KVM Technology Previews ---------------------------- - KVM on System z using the qemu-system-s390x system emulator is not yet fully supported. Other support statements made throughout this document generally refer to x86 usage only. - Virtio-data-block - data-plane is a experimental block I/O backend which provides higher throughput. - Specifying and placing PCI devices on a PCI bridge allows for a greater number of devices. - Nested VMX and SVM virtualization is possible. - RBD (Rados Block Device) integration is now enabled on the x86_64 architecture in support of the SUSE Enterprise Storage product. Noteworthy QEMU/KVM Unsupported Features ---------------------------------------- - Note that some features are unsupported simply due to lack of validation. If an existing feature is desired, but not marked supported, let SUSE know about your requirements. - The TCG "acceleration" mode may be helpful for problem isolation, but otherwise presents insufficient benefit and stability. - Use of -cpu host is not supported in all host/guest configurations. - ISCSI integration is not enabled in KVM. It is however possible for guests to access iSCSI targets available to the host via the blockio interfaces. - GlusterFS integration is not enabled. Deprecated, Superseded and Dropped Features ------------------------------------------- - The deprecated windows drivers (win-virtio-drivers.iso) are no longer provided. The Virtual Machine Driver Pack is the supported way to get virtio drivers for Windows guests. - The use of ",boot=on" for virtio disks is no longer needed since the bios used supports the virtio block interface directly. In fact, its usage may cause problems, and is now considered deprecated. - The use of "?" as a parameter to "-cpu", "-soundhw", "-device", "-M", "-machine", "-d", and "-clock" is now considered deprecated. Use "help" instead. - These previously supported command line options are no longer recognized: -device pc-sysfw (no longer needed) - These previously unsupported command line options are now deprecated: -no-kvm-irqchip (use -machine kernel_irqchip=off instead) -no-kvm-pit -no-kvm-pit-reinjection -tdf - These previously unsupported command line options are no longer recognized: -device cfi.pflash01 -device esp -device exynos4210-ehci-usb -device fusbh200-ehci-usb -device icc-bridge -device q35-pcihost -device mch -device smbus-eeprom -device SUNW,fdtwo -device sysbus-ahci -device sysbus-fdc -device sysbus-ohci -device tegra2-ehci-usb -device testdev (use -device pc-testdev instead) -device virtio-mmio -device xln,ps7-usb -enable-nesting -kvm-shadow-memory (use -machine kvm_shadow_mem= instead) -M mac -nvram -old-param -osk -pcidevice (use -device pci-assign instead) -qtest -semihosting - These previously supported monitor commands are no longer recognized: pci_add (use device_add instead) pci_del (use device_del instead) - These previously unsupported monitor commands are no longer recognized: cpu_set QEMU Command-Line and Monitor Syntax and Support ------------------------------------------------ - The QEMU program command-line syntax is as follows: qemu-system-i386 [options] [disk_image] qemu-system-s390x [options] qemu-system-x86_64 [options] [disk_image] Where 'options' are taken from the options listed below, and 'disk_image' is the file system reference to the the x86 guest's primary IDE based hard disk image. This image as well as those used with -drive or -cdrom, may be in the raw (no format), qcow2 or qed storage formats, and may be located in files within the host filesystem, logical volumes, host physical disks, or network based storage. Read only media may also be accessed via URL style protocol specifiers. - The following command line options are supported: -alt-grab -append ... -audio-help -balloon ... -boot ... -cdrom ... -chardev .. -clock -cpu ... (all except host) -ctrl-grab -d ... -daemonize -debugcon ... -device [isa-serial|isa-parallel|isa-fdc|ide-drive|ide-hd|ide-cd| kvm-pci-assign|VGA|cirrus-vga|rtl8139|virtio-net-pci|virtio-blk-pci| virtio-balloon-pci|virtio-9p-pci|usb-hub|usb-ehci|usb-tablet| usb-storage|usb-mouse|usb-kbd|virtserialport|virtconsole| virtio-serial-pci|sga|i82559er|e1000|virtio-scsi-pci|scsi-cd|scsi-hd| scsi-generic|scsi-disk|scsi-block|pci-serial|pci-serial-2x| pci-serial-4x|ich9-ahci|piix-usb-uhci|usb-host|usb-serial| usb-wacom-tablet|usb_braille|usb-net|pci-ohci|piix4-usb-uhci| virtio-rng-pci|i6300esb|ib700|qxl|qxl-vga|pvpanic|vfio-pci|ivshmem| pci-bridge] (the following are aliases of these supported devices: ahci| virtio-blk|virtio-net|virtio-serial|pci-assign|virtio-balloon) -display ... -drive ... (if specified if=[ide|floppy|virtio] and format=[raw|qcow2|qed] and snapshot=off only) -echr ... -enable-kvm -fda/-fdb ... -fsdev ... -full-screen -gdb ... -global ... -h -hda/-hdb/-hdc/-hdd ... -help -incoming ... -initrd ... -k ... -kernel ... -loadvm ... -m ... -machine [help|?|none|pc|pc-0.12|pc-0.14|pc-0.15|pc-i440fx-1.4| pc-i440fx-1.7|pc-q35-1.7|pc-i440fx-2.0|pc-q35-2.0] -mem-path ... -mem-prealloc -M [help|?|none|pc|pc-0.12|pc-0.14|pc-0.15|pc-i440fx-1.4|pc-i440fx-1.7| pc-q35-1.7|pc-i440fx-2.0|pc-q35-2.0] -mon ... -monitor ... -msg ... -name ... -netdev [user|tap|bridge] ... -net [nic|user|tap|bridge|none] ... (for model= only rtl8139, e1000 and virtio are supported) -no-acpi -nodefaults -nodefconfig -no-frame -nographic -no-hpet -no-quit -no-reboot -no-shutdown -no-user-config -object ... -parallel ... -pidfile ... -qmp ... -readconfig ... -realtime ... -rtc ... -runas ... -s -S -sandbox ... -sdl -serial ... -smbios ... -smp ... -spice -tdf -usb -usbdevice [disk|host|serial|braille|net|tablet|mouse] -uuid .. -version -vga [std|cirrus|qxl|none] -virtfs ... -vnc ... -watchdog ... -watchdog-action ... -writeconfig ... - The following monitor commands are supported: ? balloon target ... block_resize ... boot_set ... [c|cont] change device ... chardev-add ... chardev-remove ... cpu ... cpu-add ... delvm ... device_add ... device_del ... drive_add ... drive_backup ... drive_del ... dump_guest_memory ... eject ... gdbserver ... help info ... loadvm ... logfile ... logitem ... mce ... memsave ... migrate ... migrate_cancel migrate_set_cache_size ... migrate_set_capability ... migrate_set_downtime ... migrate_set_speed ... mouse_button ... mouse_move ... mouse_set ... nmi ... object_add ... object_del ... pci_add ... pci_del... pmemsave ... [p|print] ... q qemu-io ... ringbuf_read ... ringbuf_write ... savevm ... sendkey ... snapshot_blkdev_internal ... snapshot_delete_blkdev_internal ... stop system_powerdown system_reset system_wakeup usb_add ... usb_del ... watchdog_action ... x ... xp ... - The following command line options are unsupported: -acpitable ... -add-fd ... -bios ... -bt ... -chroot ... -cpu host -curses -device [ipoctal232|i82562|ccid-card-passthru|nec-usb-xhci|hda-duplex| hda-output|usb-bot|lsi53c810a|ich9-usb-uhci2|ich9-usb-uhci6| ich9-usb-uhci5|ich9-usb-uhci3|isa-debug-exit|ne2k_pci|usb-uas| ich9-usb-uhci4|ioh3420|isa-ide|usb-ccid|ich9-usb-ehci2|pcnet| ich9-intel-hda|dc390|ich9-usb-ehci1|hda-micro|x3130-upstream| isa-cirrus-vga|ich9-usb-uhci1|pc-testdev|ne2k_isa|isa-vga|cs4231a|gus| vmware-svga|i82801b11-bridge|i82557a|i82557c|i82557b|i82801|AC97| am53c974|intel-hda|i82558a|i82558b|usb-audio|i82550|isa-debugcon|sb16| megasas|i82551|xio3130-downstream|vt82c686b-usb-uhci|tpci200|i82559a| i82559b|i82559c|isa-applesmc|usb-bt-dongle|adlib|ES1370|lsi53c810| nvme|pci-testdev|pvscsi|vhost-scsi|vhost-scsi-pci|virtio-9p-device| virtio-balloon-device|virtio-blk-device|virtio-net-device| virtio-rng-device|virtio-scsi-device|virtio-serial-device|vmxnet3| xen-pci-passthrough|xen-platform|xen-pvdevice|piix3-ide|piix3-ide-xen| piix3-ide|i8042] (the following are aliases of these supported devices: lsi) (note that some of these device names represent supported devices and are used internally, but not specifyable via -device) -drive ,if=[scsi|mtd|pflash], snapshot=on, format=[anything besides raw, qcow2, or qed] -dtb -g ... -icount ... -iscsi ... -L ... -machine [pc-q35-1.6|pc-q35-1.5|pc-q35-1.4|pc-i440fx-1.6|pc-i440fx-1.5|pc-1.3| pc-1.2|pc-1.1|pc-1.0|pc-0.13|pc-0.11|pc-0.10|isapc|xenpv] -M [pc-q35-1.6|pc-q35-1.5|pc-q35-1.4|pc-i440fx-1.6|pc-i440fx-1.5|pc-1.3| pc-1.2|pc-1.1|pc-1.0|pc-0.13|pc-0.11|pc-0.10|isapc|xenpv] -mtdblock ... -netdev [socket|dump|vde|hubport] ... -net [socket|dump|vde] ... -no-fd-bootchk -no-kvm -no-kvm-irqchip -no-kvm-pit -no-kvm-pit-reinjection -numa ... -option-rom ... -pflash ... -portrait -prom-env ... -qtest ... -qtest-log ... -rotate -sd ... -set ... -show-cursor -singlestep -snapshot -soundhw ... -tb-size ... -trace ... -vga [vmware|xenfb] -virtioconsole ... -win2k-hack - The following monitor commands are unsupported: acl_add ... acl_policy ... acl_remove ... acl_reset ... acl_show ... block_job_cancel ... block_job_complete ... block_job_pause ... block_job_resume ... block_job_set_speed ... block_passwd ... client_migrate_info ... close_fd ... commit ... drive_mirror ... expire_password ... hostfwd_add ... hostfwd_remove ... host_net_add ... host_net_remove ... i ... nbd_server_add ... nbd server_start ... nbd_server_stop ... netdev_add netdev_del ... o ... pcie_aer_inject_error ... screendump ... set_link ... set_password ... singlestep ... snapshot_blkdev ... stopcapture ... sum ... trace_event ... wavcapture ... - The following QMP commands are supported: add_client add-fd balloon block-commit blockdev-add blockdev-snapshot-delete-internal-sync blockdev-snapshot-internal-sync blockdev-snapshot-sync block_passwd block_resize block_set_io_throttle block-stream change change-vnc-password chardev-add chardev-remove client_migrate_info closefd cont cpu cpu-add device_add device_del device-list-properties dump-guest-memory eject expire_password getfd human-monitor-command inject-nmi memsave migrate migrate_cancel migrate-set-cache-size migrate-set-capabilities migrate_set_downtime migrate_set_speed object-add object-del pmemsave qmp_capabilities qom-get qom-list qom-list-types qom-set query-balloon query-block query-block-jobs query-blockstats query-chardev query-chardev-backends query-command-line-options query-commands query-cpu-definitions query-cpus query-dump-guest-memory-capability query-events query-fdsets query-iothreads query-kvm query-machines query-mice query-migrate query-migrate-cache-size query-migrate-capabilities query-name query-named-block-nodes query-pci query-rx-filter query-spice query-status query-target query-tpm query-tpm-models query-tpm-types query-uuid query-version query-vnc quit remove-fd ringbuf-read ringbuf-write screendump send-key set_link set_password stop system_powerdown system_reset system_wakeup transaction xen-save-devices-state xen-set-global-dirty-log - The following QMP commands are unsupported: block-job-cancel block-job-complete block-job-pause block-job-resume block-job-set-speed drive-backup drive-mirror netdev_add netdev_del nbd-server-add nbd-server-start nbd-server-stop